Optimization of ozonation process for organic matter and ecotoxicity removal from landfill leachate by applying rotatable central composite design (RCCD)

Ozonation process was used for leachate treatment from a landfill located in Rio de Janeiro, Brazil. The influence of pH and ozone concentration on COD (Chemical Oxygen Demand), TOC (Total Organic Carbon), Absorbance at 254 nm (ABS254nm), and True color was evaluated through RCCD (Rotatable Central Composite Design) experimental design, resulting in mathematical models that were statistically analyzed in Statistica and Design Expert software. The removals obtained was up to 26.1%, 29.9%, 56.9%, and 97.9% for COD ([COD](0)=3,323 mg/L), TOC ([TOC](0)=1,275 mg/L), ABS254nm (ABS(0)=32.2), and True color ([True color](0)=3,467 mgPt-Co/L), respectively. Statistical and variance analysis of the experimental data revealed that one quadratic model obtained in Statistica was valid, ABS254nm reduction. However, by applying the Design Expert software, modified models were generated to predict the behavior of all dependent variables. Thus, the optimum point for the best response after ozonation of the landfill leachate was at the highest pH and the lowest ozone dose (9 and 2.2 mgO(3)/m(3), respectively). Toxicity toward Allivibrio fischeri bacteria was abated at the same time that it decreased the impact of the effluent to Danio rerio fish (from 125 UT to 62 UT) on the treated leachate.