Niobium Sputter Coated Stainless Steel as a Bipolar Plate Material for Polymer Electrolyte Membrane Fuel Cell Stacks

被引：0

作者：

Kim, Jun-Ho ^{[1
]}

Kim, Sun-Kwang ^{[1
]}

You, Yong-Zoo ^{[1
]}

Kim, Dae-Il ^{[1
]}

Hong, Sung-Tae ^{[2
]}

Suh, Ho-Cheol ^{[3
]}

Weil, K. Scott ^{[4
]}

机构：

[1] Univ Ulsan, Sch Mat Sci & Engn, Ulsan 680749, South Korea

[2] Univ Ulsan, Sch Mech Engn, Ulsan 680749, South Korea

[3] Sejong Ind Co LTD, Ulsan, South Korea

[4] Pacific NW Natl Lab, Richland, WA 99352 USA

来源：

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE | 2011年 / 6卷 / 09期

关键词：

niobium; sputtering; stainless steel; bipolar plate; polymer electrolyte membrane fuel cell; ALLOYS; RESISTANCE;

D O I：

暂无

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Niobium (Nb) sputter coated 316L stainless steel (SS) is investigated as an alternative to a previously developed Nb clad 304L SS material for use in a bipolar plate component of a polymer electrolyte membrane fuel cell (PEMFC) stack. The electrochemical properties of the Nb sputter coated 316L SS are evaluated via static corrosion and interfacial contact resistance testing and through potentiodynamic and potentiostatic measurements conducted under half-cell environments of a standard PEMFC stack. The experimental results show that the electrochemical properties of the sputtered Nb coatings are quite viable for the PEMFC bipolar plate application, while the thickness of the sputtered Nb coating is substantially thinner than that of the roll clad Nb coating.

引用

页码：4365 / 4377

页数：13

共 50 条

[41] Investigation of C/Al-Cr-N multilayer coatings for stainless steel bipolar plate in polymer electrolyte membrane fuel cells
Wang, Zhiyuan
Wang, Yibo
Li, Zhuguo
Feng, Kai
Huang, Jian
Lu, Fenggui
Yao, Chengwu
Cai, Xun
Wu, Yixiong
SURFACE & COATINGS TECHNOLOGY, 2014, 258 : 1068 - 1074
[42] Polyethylene-carbon material for polymer electrolyte membrane fuel cell bipolar plates
Greenwood, P.
Chen, R.
Thring, R. H.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2008, 222 (L3) : 197 - 208
[43] Localised corrosion processes of austenitic stainless steel bipolar plates for polymer electrolyte membrane fuel cells
Mele, Claudio
Bozzini, Benedetto
JOURNAL OF POWER SOURCES, 2010, 195 (11) : 3590 - 3596
[44] Stainless steel bipolar plate coated with polyaniline/Zn-Porphyrin composites coatings for proton exchange membrane fuel cell
M. A. Deyab
G. Mele
Scientific Reports, 10
[45] Stainless steel bipolar plate coated with polyaniline/Zn-Porphyrin composites coatings for proton exchange membrane fuel cell
Deyab, M. A.
Mele, G.
SCIENTIFIC REPORTS, 2020, 10 (01)
[46] Chromium nitride/Cr coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cell
Tian, Rujin
JOURNAL OF POWER SOURCES, 2011, 196 (03) : 1258 - 1263
[47] Development of a niobium clad PEM fuel cell bipolar plate material
Weil, K. Scott
Xia, Gordon
Yang, Z. Gary
Kim, Jin Yong
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2007, 32 (16) : 3724 - 3733
[48] Surface Characteristic of Chemically Converted Graphene Coated Low Carbon Steel by Electro Spray Coating Method for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate
Kim, Jungsoo
Kim, Yang Do
Nam, Dae Geun
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2013, 13 (05) : 3387 - 3391
[49] Corrosion behavior of pre-oxidized and thermally nitrided stainless steel for polymer electrolyte membrane fuel cell bipolar plates
Lee, Seok-Hee
Yang, Tae-Hyun
Hyun, Sang-Hoon
Yoon, Young-Soo
CORROSION SCIENCE, 2012, 58 : 79 - 85
[50] Multilayer graphene for long-term corrosion protection of stainless steel bipolar plates for polymer electrolyte membrane fuel cell
Stoot, Adam C.
Camilli, Luca
Spiegelhauer, Susie-Ann
Yu, Feng
Boggild, Peter
JOURNAL OF POWER SOURCES, 2015, 293 : 846 - 851

← 1 2 3 4 5 →