Binder surface segregation during spray drying of ceramic slurry

被引：31

作者：

Zhang, Y ^{[1
]}

Tang, XX ^{[1
]}

Uchida, N ^{[1
]}

Uematsu, K ^{[1
]}

机构：

[1] Nagaoka Univ Technol, Dept Chem, Nagaoka, Niigata 94021, Japan

来源：

JOURNAL OF MATERIALS RESEARCH | 1998年 / 13卷 / 07期

关键词：

D O I：

10.1557/JMR.1998.0267

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Spray-dried granules were observed by a laser microscopy with the immersion liquid technique. The binder distribution in the granules was analyzed from light intensity profiles of the images. The results showed that a surface layer with a large amount of the binder is formed in the spray-dried granule, and the segregation is influenced by initial binder concentration and size of atomized droplet. A computer simulation for soluble binder segregation during spray drying was conducted by considering simultaneously the solvent evaporation, the relative migration between the liquid and the particles, the diffusion, and drying shrinkage. The simulation coincides with the experimental results. To make uniform granules, reducing the amount of binder, liquid content, size of atomized droplet, and drying rate is favorable.

引用

页码：1881 / 1887

页数：7

共 50 条

[21] OPTIMISATION OF SPRAY DRYING OPERATING CONDITIONS OF TOMATO SLURRY USING RESPONSE SURFACE METHODOLOGY
Anisuzzaman, S. M.
Joseph, Collin G.
Endu, Olivia Mayang
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2023, 18 (01): : 112 - 135
[22] Effect of Solution Diffusion on Binder Segregation Model during Convective Drying of Porous Solid
Imakoma, Hironobu
Tsubota, Keiji
Horie, Takafumi
KAGAKU KOGAKU RONBUNSHU, 2011, 37 (03) : 235 - 240
[23] Analysis of constant rate period of spray drying of slurry
Liang, H
Shinohara, K
Minoshima, H
Matsushima, K
CHEMICAL ENGINEERING SCIENCE, 2001, 56 (06) : 2205 - 2213
[24] Dispersibility mechanism and spray drying of SiC aqueous slurry
Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
不详
Kuei Suan Jen Hsueh Pao, 2008, 5 (642-647):
[25] SPRAY DRYING OF BARIUM HEXAFERRITE SLURRY IN A MAGNETIC-FIELD
KHAN, MAH
AMERICAN CERAMIC SOCIETY BULLETIN, 1982, 61 (08): : 810 - 810
[26] A glass transition temperature approach for the prediction of the surface stickiness of a drying droplet during spray drying
Adhikari, B
Howes, T
Lecomte, D
Bhandari, BR
POWDER TECHNOLOGY, 2005, 149 (2-3) : 168 - 179
[27] Role of Surface Characteristics of Mannitol in Crystallization of Fenofibrate During Spray Drying
Thakur, Poonam Singh
Thakore, Samarth D.
Bansal, Arvind K.
JOURNAL OF PHARMACEUTICAL SCIENCES, 2020, 109 (02) : 1105 - 1114
[28] Optimization of Alumina Slurry Properties and Drying Conditions in the Spray Drying Process and Characterization of Corresponding Coating Fabricated by Atmospheric Plasma Spray
Bai, Y.
Yang, J. F.
Lee, S. W.
ADVANCED ENGINEERING CERAMICS AND COMPOSITES, 2011, 484 : 158 - +
[29] Numerical and experimental characterization of the hydrodynamics and drying kinetics of a barbotine slurry spray
Sebastia-Saez, Daniel
Hernandez, Leonor
Arellano-Garcia, Harvey
Enrique Julia, Jose
CHEMICAL ENGINEERING SCIENCE, 2019, 195 : 83 - 94
[30] Binder migration during drying of pigment coatings
Ranger, Alan E.
Paper Technology, 1994, 35 (10): : 40 - 46

← 1 2 3 4 5 →