Effect of water curing duration on strength behaviour of portland composite cement (PCC) mortar

被引：6

作者：

Caronge, M. A. ^{[1
]}

Tjaronge, M. W. ^{[1
]}

Hamada, H. ^{[2
]}

Irmawaty, R. ^{[1
]}

机构：

[1] Hasanuddin Univ, Dept Environm Engn, Fac Engn, Gowa, Indonesia

[2] Kyushu Univ, Dept Civil & Struct Engn, Fac Engn, Fukuoka, Japan

来源：

GLOBAL CONGRESS ON CONSTRUCTION, MATERIAL AND STRUCTURAL ENGINEERING 2017 (GCOMSE2017) | 2017年 / 271卷

关键词：

CORROSION;

D O I：

10.1088/1757-899X/271/1/012018

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Cement manufacturing of Indonesia has been introduced Portland Composite Cement (PCC) to minimize the rising production cost of cement which contains 80% clinker and 20% mineral admixture. A proper curing is very important when the cement contains mineral admixture materials. This paper reports the results of an experimental study conducted to evaluate the effect of water curing duration on strength behaviour of PCC mortar. Mortar specimens with water to cement ratio of (W/C) 0.5 were casted. Compressive strength, flexural strength and concrete resistance were tested at 7, 28 and 91 days cured water. The results indicated that water curing duration is essential to continue the pozzolanic reaction in mortar which contributes to the development of strength of mortar made with PCC.

引用

页数：6

共 50 条

[11] Effects of the Curing Conditions on the Carbonation Curing Efficiency of Ordinary Portland Cement and a Belite-Rich Cement Mortar
Kim, Hyeju
Pei, Junjie
Siddique, Salman
Jang, Jeong-Gook
SUSTAINABILITY, 2021, 13 (09)
[12] Effect of Silica Fume on Compressive Strength and Water Absorption of the Portland Cement-Silica Fume Blended Mortar
Uddin, Md. Alhaz
Bashir, Muhammad Tariq
Khan, Abdul Masroor
Alsharari, Fahad
Farid, Faizan
Alrowais, Raid
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024, 49 (04) : 4803 - 4811
[13] The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes
Ozer, B
Ozkul, MH
CEMENT AND CONCRETE RESEARCH, 2004, 34 (01) : 13 - 18
[14] The effect of temperature and duration of curing on the strength of fly ash based geopolymer mortar
Adam, Andi Arham
Horianto
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE CIVIL ENGINEERING STRUCTURES AND CONSTRUCTION MATERIALS, 2014, 95 : 410 - 414
[15] Effect of curing on mechanical strength and microstructure of fly ash blend GGBS geopolymer, Portland cement mortar and its behavior at elevated temperature
Poornima, N.
Katyal, Dheeraj
Revathi, T.
Sivasakthi, M.
Jeyalakshmi, R.
MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 863 - 870
[16] The Effect of Curing Time on Compressive Strength of Composite Cement Concrete
Uddin, Md. Alhaz
Jameel, Mohammed
Sobuz, Habibur Rahman
Hasan, Noor Md. Sadiqul
Islam, Md. Shahinul
Amanat, Khan Mahmud
PROGRESS IN INDUSTRIAL AND CIVIL ENGINEERING, PTS. 1-5, 2012, 204-208 : 4105 - +
[17] EFFECT OF CURING CONDITIONS ON TOTAL WATER CONTENT OF HARDENED PORTLAND CEMENT PASTE
HANNA, KM
ELHEMALY, SA
JOURNAL OF APPLIED CHEMISTRY, 1969, 19 (09): : 241 - +
[18] Research on the influence of curing strategies on the compressive strength and hardening behaviour of concrete prepared with Ordinary Portland Cement
Rahimi, Mohammad Zaheer
Zhao, Rongguo
Sadozai, Shafiullah
Zhu, Feng
Ji, Nan
Xu, Lingpeng
CASE STUDIES IN CONSTRUCTION MATERIALS, 2023, 18
[19] EFFECT OF SEA WATER ON THE STRENGTH OF POROUS CONCRETE CONTAINING PORTLAND COMPOSITE CEMENT AND MICROFILAMENT POLYPROPYLENE FIBER
Tjaronge, M. W.
Djamaluddin, Rudy
Fatriady, Amirullah
PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON APAC 2011, 2012,
[20] Effect of microwave-assisted curing process on strength development and curing duration of cellular lightweight geopolymer mortar
Suwan, Teewara
Paphawasit, Boontarika
Fan, Mizi
Jitsangiam, Peerapong
Chindaprasirt, Prinya
MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (09) : 1040 - 1048

← 1 2 3 4 5 →