Evaporation of ammonia in a smooth horizontal tube:: Heat transfer measurements and predictions

Experimental test results for Pow boiling of pure ammonia inside horizontal tubes were obtainedfor a plain stainless steel tube. Tests were run at a nominal saturation temperature of 4 degrees C, nine mass velocities from 20-140 kg/m(2) s, vapor qualities from 1-99 percent and heat fluxes from 5-58 kW/m(2). Two-phase flow observations showed that the current test data covered the following regimes: fully stratified, stratified-wavy, intermittent, annular and annular with partial dryout. The Kattan-Thome-Favrat flow boiling model accurately predicted the local heat transfer coefficients measured in all these flow regimes with only two small modifications to their flow map (to extend its application to G < 100 kg/m(2) s). Their flow boiling model was also successfully compared to the earlier ammonia flow boiling data of Chaddock and Buzzard (1986). The Gungor-Winterton (1987) correlation instead gave very poor accuracy for ammonia.