Correlation of Mechanical Properties with Diameter and Cooling Rate of 1080 Wire-Rod

被引:5
|
作者
Kohli, A. [1 ]
Poirier, D. R. [1 ]
机构
[1] Univ Arizona, Dept Mat Sci & Engn, Tucson, AZ 85721 USA
关键词
pearlite transformation; steel; wire-rod; PEARLITIC STEEL WIRES; HIGH-CARBON STEEL; STRENGTH;
D O I
10.1007/s11665-017-3079-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
More than 540 heats of 1080 wire-rod were statistically analyzed by regression analyses to see whether tensile strength and percent reduction in area (%RA) relate to wire-rod diameter and composition. As diameter increases from 5.6 to 12.7 mm, the trend in %RA shows a decrease with negligible effect on the trend of the tensile strength. It was found that the estimated cooling rate at 700 A degrees C during controlled cooling is responsible for the "diameter effect." The effect of composition on %RA is minor when contrasted to the "diameter effect." In particular, the effect of the concentrations of the residual elements on %RA within the compositional range studied is negligible.
引用
收藏
页码:5871 / 5876
页数:6
相关论文
共 50 条
  • [21] Effect of controlled cooling rate in phase transformation zone on structure and properties of wire rod of steel ER70S-6
    Ding, Hua
    Wang, Li
    Liu, Yazheng
    Zhang, Lifen
    Teshugang/Special Steel, 2001, 22 (06):
  • [22] INFLUENCE OF PATENTING ROLLED ROD FROM ROLLING PREHEAT ON MECHANICAL PROPERTIES OF WIRE
    SHAPOVALOV, SI
    STYCHINS.LP
    ALIMOV, VI
    STAL IN ENGLISH-USSR, 1965, (06): : 501 - +
  • [23] Effects of Rare Earth on the Microstructure and Mechanical Properties of a Pearlitic Steel Wire Rod
    Yang, Zhendan
    Zhang, Xiao
    Sang, Chenhao
    Wang, Pei
    Zhang, Lei
    Li, Dianzhong
    STEEL RESEARCH INTERNATIONAL, 2023, 94 (12)
  • [24] INFLUENCE OF WIRE DIAMETER AND LEAD BATH TEMPERATURE ON MECHANICAL-PROPERTIES OF PATENTED DRAWN STEEL WIRE
    PAWELSKI, O
    BECKER, J
    PUNTER, A
    STAHL UND EISEN, 1978, 98 (21): : 1082 - 1088
  • [25] Effects of wire diameter on mechanical and microstructural properties of Inconel 625 fabricated by wire arc additive manufacturing
    Gurmesa, Fakada Dabalo
    Lemu, Hirpa G.
    Tucho, Wakshum Mekkonen
    Akessa, Adugna Deressa
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 35 : 3226 - 3235
  • [26] Ultra-Small Diameter Round REBCO Wire With Robust Mechanical Properties
    Kar, Soumen
    Luo, Wenbo
    Selvamanickam, Venkat
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2017, 27 (04)
  • [27] RELATIONSHIP BETWEEN COOLING CONDITIONS IN A WIRE ROLLING TRAIN AND FORMATION OF SCALE AS WELL AS PICKLING PROPERTIES OF STEEL WIRE ROD
    FUNKE, P
    HEINRITZ, M
    STAHL UND EISEN, 1970, 90 (03): : 111 - &
  • [28] EFFECT OF DIFFERENT CONDITIONS OF COOLING ON PROPERTIES OF WIRE ROD OF UNALLOYED STEEL DURING ROLLING ON A CONTINUOUS WIRE MILL TRAIN
    HUSSY, B
    PETERSEN, J
    STAHL UND EISEN, 1967, 87 (02): : 89 - &
  • [29] THE EFFECT OF CARBON CONCENTRATION ON THE RETAINED AUSTENITE CONTENT AND THE MECHANICAL PROPERTIES OF TRIP STEEL WIRE ROD OBTAINED FROM THE STELMOR CONTROLLED COOLING LINE
    Muskalski, Z.
    Wiewiorowska, S.
    ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (03) : 1949 - 1951
  • [30] THE EFFECT OF MICROSTRUCTURE BANDING ON THE MECHANICAL AND TECHNOLOGICAL PROPERTIES OF WIRE ROD OF COLD UPSETTING STEEL
    Laber, Konrad
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 746 - 751