Phase stability and mechanical properties of Al2O3-cBN composites prepared via spark plasma sintering

被引:21
|
作者
Klimczyk, Piotr [1 ]
Wyzga, Piotr [1 ]
Cyboron, Jolanta [1 ]
Laszkiewicz-Lukasik, Jolanta [1 ]
Podsiadlo, Marcin [1 ]
Cygan, Slawomir [1 ]
Jaworska, Lucyna [1 ]
机构
[1] Inst Adv Mfg Technol, Res Network Lukasiewicz, Wroclawska 37a, PL-30011 Krakow, Poland
关键词
Alumina (Al2O3); Cubic boron nitride (cBN); Zirconia (ZrO2); Titanium nitride (TiN); Spark plasma sintering (SPS); Mechanical properties; CUBIC BORON-NITRIDE; TRANSFORMATION; HARDNESS;
D O I
10.1016/j.diamond.2020.107762
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The sintering behaviours, phase compositions, microstructures, and mechanical properties of Al2O3-based matrix composites reinforced with up to 20 vol% of cubic boron nitride (cBN, super-hard phase) were investigated. The materials were prepared via the method of spark plasma sintering (SPS). Additionally, pure cBN powder was treated under identical SPS conditions for the purpose of comparison. The temperatures at which hexagonal boron nitride (hBN, graphite-like phase) was detected in pure cBN and in cBN dispersed in the Al2O3 + 10 TiN matrix were 1600 degrees C and 1300 degrees C, respectively. The presence of additives in the Al2O3 matrix had a pronounced influence on the formation of hBN, with TiN > ZrO2 > pure Al2O3. All the composites exhibited quite good improvements in fracture toughness, of about 1.5 MPa.m(1/2) on average over that of Al2O3. Crack deflection on cBN grains was identified as the main toughening mechanism of the ceramics investigated.
引用
收藏
页数:7
相关论文
共 50 条
  • [41] Microstructure and mechanical properties of ZrO2(Y2O3)-Al2O3 nanocomposites prepared by spark plasma sintering
    Hiroshi Izui
    Michiharu Okano
    Taku Watanabe
    Particuology, 2012, 10 (03) : 345 - 351
  • [42] Microstructure and Wear Properties of Cu-La2O3 Composites Prepared by Spark Plasma Sintering
    Zheng, Runguo
    Li, Nana
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (05) : 1103 - 1112
  • [43] High-pressure synthesis of Al2O3-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties
    Wu, Jiakun
    Wang, Haikuo
    Zhang, Zhicai
    Hou, Zhiqiang
    Wu, Dazhuan
    Ouyang, Xiaoping
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 109
  • [44] Enhanced mechanical properties of WC-reinforced Al2O3 ceramics via spark plasma sintering
    Chen, Wei-Hsio
    Nayak, Pramoda K.
    Lin, Hao-Tung
    Lee, Alex C.
    Huang, Jow-Lay
    CERAMICS INTERNATIONAL, 2015, 41 (01) : 1317 - 1321
  • [45] Fabrication of Ti/Al2O3 composites by spark plasma sintering
    Wang, Z
    Li, ML
    Shen, Q
    Zhang, LM
    COMPOSITE MATERIALS III, 2003, 249 : 137 - 140
  • [46] The dynamic properties of SiCp/Al composites fabricated by spark plasma sintering with powders prepared by mechanical alloying process
    Zhang, Jiangtao
    Shi, Huiji
    Cai, Mingchun
    Liu, Lisheng
    Zhai, Pengcheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 218 - 224
  • [47] Microstructures and Mechanical Properties of GNS/Al Composites Fabricated by Spark Plasma Sintering
    Hu Zhengyang
    Zhang Zhaohui
    Wang Hu
    Li Shenglin
    Zhao Shuangzan
    Yin Shipan
    Song Qi
    2ND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS AND MATERIAL ENGINEERING (ICCMME2017), 2017, 1846
  • [48] Densification and mechanical properties of fine-grained Al2O3-ZrO2 composites consolidated by spark plasma sintering
    Meng, Fancheng
    Liu, Cheng
    Zhang, Fan
    Tian, Zhongqing
    Huang, Weijiu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 512 (01) : 63 - 67
  • [49] Microstructure and properties of WB/Al nuclear shielding composites prepared by spark plasma sintering
    Qiao, Jing
    Zhang, Quan
    Zhou, Yuchao
    Gao, Xiaosa
    Wu, Gaohui
    CERAMICS INTERNATIONAL, 2022, 48 (21) : 31952 - 31964
  • [50] Mechanical Properties of ZrO2 (Y2O3)-Al2O3 Nanocomposites with Addition of Hydroxyapatite Prepared by Spark Plasma Sintering
    Li, Shufeng
    Lzui, Hiroshi
    Okano, Michiharu
    Zhang, Weihua
    Watanabe, Taku
    MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS, 2010, 631-632 : 413 - +