MODELING OF CERAMIC MICROGRIDNING BY COHESIVE ZONE BASED FINITE ELEMENT METHOD

被引：0
|
作者：
Feng, Jie [1 ]
Kim, Bongsuk [1 ]
Ni, Jun [1 ]
机构：
[1] Univ Michigan, Dept Mech Engn, Ann Arbor, MI 48109 USA
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, VOL 2 | 2009年
关键词：
Microgrinding; ceramic materials; Finite element analysis and cohesive zone method; POLYCRYSTALLINE BRITTLE MATERIALS; GRAIN LEVEL MODEL; FAILURE INITIATION; SIMULATION; MICROSTRUCTURES; EVOLUTION; FRACTURE; DAMAGE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study investigates modeling of microgrinding of ceramic materials by cohesive zone method (CZM) and Finite element analysis (FEA). A maximum grinding chip thickness model, which considers detail diamond profile and tool deflection, is developed in this study. The chip thickness model is then implemented in FEA to predict peak grinding force in grinding alumina. The simulation result is compared with experimental result for a specific diamond on the microgrinding tool. The feasibility of modeling ceramic microgrinding by CZM based FEA is then discussed.
引用
收藏
页码：417 / 427
页数：11
相关论文
共 50 条
  • [41] Cohesive zone failure modeling of polymeric adhesives used in ceramic/metal armor
    Pisavadia, Harshil
    Toussaint, Genevieve
    Dolez, Patricia
    Hogan, James D.
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2022, 170
  • [42] Finite element analysis of the cohesive zone across a strength mismatched bimetallic interface
    Ukadgaonker, Vijay. G.
    Bhat, Sunil
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VI, 2007, 348-349 : 85 - +
  • [43] Finite element analysis of delamination of a composite component with the cohesive zone model technique
    Lampani, Luca
    ENGINEERING COMPUTATIONS, 2011, 28 (1-2) : 30 - 46
  • [44] Modelling of micromechanical fracture using a cohesive finite element method
    Zhou, M
    Zhai, J
    SHOCK COMPRESSION OF CONDENSED MATTER-1999, PTS 1 AND 2, 2000, 505 : 623 - 628
  • [45] A contact algorithm for cohesive cracks in the extended finite element method
    Fang, Huangcheng
    Zhang, Dingli
    Zhou, Mozhen
    Fang, Qian
    Wen, Ming
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2020, 121 (12) : 2747 - 2766
  • [46] FINITE-ELEMENT MODELING OF PIEZOELECTRIC CERAMIC HYDROPHONES
    WINNICKI, RT
    AUYER, SE
    JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1975, 58 : S79 - S79
  • [47] On modeling cohesive ridge keel punch through tests with a combined finite-discrete element method
    Polojarvi, Arttu
    Tuhkuri, Jukka
    COLD REGIONS SCIENCE AND TECHNOLOGY, 2013, 85 : 191 - 205
  • [48] Finite element cohesive fracture modeling of airport pavements at low temperatures
    Kim, Hyunwook
    Buttlar, William G.
    COLD REGIONS SCIENCE AND TECHNOLOGY, 2009, 57 (2-3) : 123 - 130
  • [49] Modeling of Mixed-Mode Delamination by Cohesive Zone Method
    Zhang, Bingbing
    Yang, Daoguo
    Ernst, Leo
    Pape, Heinz
    2013 14TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2013,
  • [50] Hybrid modeling based on finite element method and neural network
    Zhou, C.-G. (zcg@nuc.edu.cn), 1600, Nanjing University of Aeronautics an Astronautics (25):
12345