Machinability evaluation of titanium alloys (Part 2) - Analyses of cutting force and spindle motor current

被引：9

作者：

Kikuchi, M ^{[1
]}

Okuno, O ^{[1
]}

机构：

[1] Tohoku Univ, Grad Sch Dent, Div Dent Biomat, Aoba Ku, Sendai, Miyagi 9808575, Japan

来源：

DENTAL MATERIALS JOURNAL | 2004年 / 23卷 / 04期

关键词：

machinability; CAD/CAM; titanium alloy;

D O I：

10.4012/dmj.23.621

中图分类号：

R78 [口腔科学];

学科分类号：

1003 ;

摘要：

To establish a method of determining the machinability of dental materials for CAD/CAM systems, the machinability of titanium, two titanium alloys (Ti-6A1-4V and Ti-6A1-7Nb), and free-cutting brass was evaluated through cutting force and spindle motor current. The metals were slotted using a milling machine and square end mills at four cutting conditions. Both the static and dynamic components of the cutting force represented well the machinability of the metals tested: the machinability of Ti-6A1-4V and Ti-6A1-7Nb was worse than that of titanium, while that of free-cutting brass was better. On the other hand, the results indicated that the spindle motor current was not sensitive enough to detect the material difference among the titanium and its alloys.

引用

页码：621 / 627

页数：7

共 50 条

[41] Microstructured surface generation and cutting force prediction of pure titanium TA2
Du, Hanheng
To, Suet
Yin, Tengfei
Zhu, Zhiwei
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2022, 75 : 101 - 110
[42] Framework for evaluation of the relative contribution of the process on porosity-cutting force dependence in micromilling of titanium foams
Fakhri, Mohammadmehdi Abolghasemi
Bordatchev, Evgueni V.
Tutunea-Fatan, O. Remus
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (11) : 1635 - 1650
[43] Surface Structure Formation in Plasma Cutting of Aluminum and Titanium Alloys Using Direct Current Straight and Reverse Polarity
Sidorov, E. A.
Grinenko, A. V.
Chumaevskii, A. V.
Rubtsov, V. E.
Nikolaeva, A. V.
Panfilov, A. O.
Knyazhev, E. O.
Cheremnov, A. M.
Utyaganova, V. R.
Osipovich, K. S.
Gurianov, D. A.
Kolubaev, E. A.
PHYSICAL MESOMECHANICS, 2024, 27 (05) : 518 - 528
[44] Surface roughness evaluation in machining titanium alloys using non-textured and textured cutting inserts
Abishekraj, N.
Gowtham, T.
Krishnaraj, V
Jahaziel, R. Bibeye
Priyadarshini, B. Geetha
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
[45] A New Variant Selection Criterion for Twin Variants in Titanium Alloys (Part 2)
Schuman, Christophe
Bao, Lei
Lecomte, Jean Sebastien
Zhang, Yudong
Raulot, Jean Marc
Philippe, Marie Jeanne
Esling, Claude
ADVANCED ENGINEERING MATERIALS, 2012, 14 (05) : 304 - 311
[46] Microstructural and Eddy Current Evaluation of Ball-Milled Nanostructured Aluminum–Titanium Alloys
Abderahim. Abada
Abderrahmane Younes
Transactions of the Indian Institute of Metals, 2024, 77 : 513 - 521
[47] Modelling and Analysis of Cutting Force Components in Turning Process of Commercially Pure Titanium Grade 2
Habrat, Witold
Sala, Monika
Krolczyk, Jolanta B.
Markopoulos, Angelos P.
Legutko, Stanislaw
ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING, 2019, : 317 - 328
[48] Force Sensorless Control of Cutting Resistance for NC Machine Tools by Spindle Motor Control Using Variable Pulse Number T-method
Ishibashi, Teruaki
Fujimoto, Hiroshi
39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 6472 - 6477
[49] ALUMINOTHERMIC PRODUCTION OF TITANIUM ALLOYS (PART 2): IMPACT OF ACTIVATED RUTILE ON PROCESS SUSTAINABILITY
Hassan-Pour, S.
Vonderstein, C.
Achimovicova, M.
Vogt, V.
Gock, E.
Friedrich, B.
METALLURGICAL & MATERIALS ENGINEERING, 2015, 21 (02) : 101 - 114
[50] Microstructural and Eddy Current Evaluation of Ball-Milled Nanostructured Aluminum-Titanium Alloys
Abada, Abderahim
Younes, Abderrahmane
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (02) : 513 - 521

← 1 2 3 4 5 →