Machinability evaluation of titanium alloys (Part 2) - Analyses of cutting force and spindle motor current

被引：9
|
作者：
Kikuchi, M [1 ]
Okuno, O [1 ]
机构：
[1] Tohoku Univ, Grad Sch Dent, Div Dent Biomat, Aoba Ku, Sendai, Miyagi 9808575, Japan
来源：
DENTAL MATERIALS JOURNAL | 2004年 / 23卷 / 04期
关键词：
machinability; CAD/CAM; titanium alloy;
D O I：
10.4012/dmj.23.621
中图分类号：
R78 [口腔科学];
学科分类号：
1003 ;
摘要：
To establish a method of determining the machinability of dental materials for CAD/CAM systems, the machinability of titanium, two titanium alloys (Ti-6A1-4V and Ti-6A1-7Nb), and free-cutting brass was evaluated through cutting force and spindle motor current. The metals were slotted using a milling machine and square end mills at four cutting conditions. Both the static and dynamic components of the cutting force represented well the machinability of the metals tested: the machinability of Ti-6A1-4V and Ti-6A1-7Nb was worse than that of titanium, while that of free-cutting brass was better. On the other hand, the results indicated that the spindle motor current was not sensitive enough to detect the material difference among the titanium and its alloys.
引用
收藏
页码：621 / 627
页数：7
相关论文
共 50 条
  • [1] CUTTING MACHINABILITY OF TITANIUM ALLOYS
    Mihai, Croitoru Sorin
    Ioan, Tanase
    Florinel, Bisu Claudiu
    George, Constantin
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2011), VOL I, 2011, : 175 - 178
  • [2] Machinability evaluation of titanium alloys
    Kikuchi, M
    Okuno, O
    DENTAL MATERIALS JOURNAL, 2004, 23 (01) : 37 - 45
  • [3] Cutting force estimation of spindle motor
    Chang, Yung-Chih
    Lee, Kuo-Teng
    Chuang, Hua-Yi
    Journal of Control Systems and Technology, 1995, 3 (02): : 145 - 152
  • [4] Cutting torque and tangential cutting force coefficient identification from spindle motor current
    Laboratory of Computed Aided Design and Production , Swiss Federal Institute of Technology, Lausanne , STI-IGM-LICP, 1015 Lausanne, Switzerland
    Aggarwal, S. (saurabh.aggarwal@epfl.ch), 1600, Springer London (65): : 1 - 4
  • [5] Cutting torque and tangential cutting force coefficient identification from spindle motor current
    Saurabh Aggarwal
    Nenad Nešić
    Paul Xirouchakis
    The International Journal of Advanced Manufacturing Technology, 2013, 65 : 81 - 95
  • [6] Cutting torque and tangential cutting force coefficient identification from spindle motor current
    Aggarwal, Saurabh
    Nesic, Nenad
    Xirouchakis, Paul
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 65 (1-4): : 81 - 95
  • [7] The use of cutting temperature to evaluate the machinability of titanium alloys
    Kikuchi, Masafumi
    ACTA BIOMATERIALIA, 2009, 5 (02) : 770 - 775
  • [8] On the machinability for alumina green compact (Part 6) -cutting force on orthogonal cutting
    Sentoku, Eiichi
    Eida, Keiichi
    Yamamoto, Atsushi
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1999, 46 (04): : 417 - 421
  • [9] Machinability Evaluation of the Finish Hard Turning α plus β Titanium Alloys
    Ming, Weiwei
    Chen, Ming
    Rong, Bin
    Han, Bing
    MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 : 551 - 554
  • [10] Indirect Measurement of Cutting Power From the Spindle Motor Current
    Chen, Zhichu
    Xie, Yang
    Lin, Wenwen
    Luo, Min
    Cao, Lixin
    INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND INFORMATION SCIENCES (ICCIS 2014), 2014, : 1278 - 1283
12345