Heat transfer and friction characteristics for artificially roughened ducts with compound turbulators

被引：100
|
作者：
Layek, Apurba [1 ]
Saini, J. S.
Solanki, S. C.
机构：
[1] NIT Durgapur, Dept Mech Engn, Durgapur 713209, India
[2] Indian Inst Technol Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2007年 / 50卷 / 23-24期
关键词：
compound-roughness; heat transfer coefficient; friction factor; chamfer angle and groove position;
D O I：
10.1016/j.ijheatmasstransfer.2007.02.042
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
An experimental investigation on heat and fluid flow characteristics of fully developed turbulent flow in a rectangular duct having repeated integral transverse chamfered rib-groove roughness on one broad wall has been carried out. Experiments encompassed the Reynolds number range of 3000-21,000; relative roughness pitch of 4.5-10, chamfer angle of 5 degrees-30 degrees, relative groove position of 0.3-0.6 and relative roughness height of 0.022-0.04. The effect of roughness parameters on Nusselt number and friction factor have been discussed and the results are compared with the results of square rib-grooved and smooth duct under similar flow conditions. The conditions for the best performance have been determined. Correlations for the Nusselt number and friction factor have been developed as a function of roughness parameters and flow Reynolds number. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4845 / 4854
页数：10
相关论文
共 50 条
  • [41] Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators
    Ahmed, Hamdi E.
    Ahmed, M. I.
    Yusoff, M. Z.
    APPLIED THERMAL ENGINEERING, 2015, 91 : 191 - 201
  • [42] Heat transfer and pressure drop measurements in rib-roughened rectangular ducts
    Gao, XF
    Sundén, B
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2001, 24 (1-2) : 25 - 34
  • [43] HEAT TRANSFER AND FRICTION IN CIRCULAR DUCTS WITH SHAPED RIBS
    Bonanni, L.
    Da Soghe, R.
    Facchini, B.
    Micio, M.
    Pievaroli, M.
    Tarchi, L.
    Abba, L.
    Maritano, M.
    10TH EUROPEAN CONFERENCE ON TURBOMACHINERY: FLUID DYNAMICS AND THERMODYNAMICS, 2013,
  • [44] Heat and fluid flow characteristics of roughened solar air heater ducts - A review
    Kumar, Anil
    Saini, R. P.
    Saini, J. S.
    RENEWABLE ENERGY, 2012, 47 : 77 - 94
  • [45] Effect of Helical Surface Disc Turbulators on Heat Transfer and Friction Factor Characteristics in the Annuli of a Double-Pipe Heat Exchanger
    Yadav, Saurabh
    Sahu, Santosh K.
    CHEMICAL ENGINEERING & TECHNOLOGY, 2019, 42 (06) : 1205 - 1213
  • [46] EFFECT OF PRANDTL NUMBER ON HEAT TRANSFER AND PRESSURE LOSS OF ARTIFICIALLY ROUGHENED FLOW CHANNELS
    BURCK, E
    CHEMIE INGENIEUR TECHNIK, 1969, 41 (16) : 934 - &
  • [47] Fluid flow and heat transfer analysis for heat transfer enhancement in three sided artificially roughened solar air heater
    Prasad, B. N.
    Behura, Arun K.
    Prasad, L.
    SOLAR ENERGY, 2014, 105 : 27 - 35
  • [48] Heat transfer and pressure drop for laminar flow of a viscous fluid in artificially roughened tubes
    Nazmeev, Yu.G.
    Konakhin, A.M.
    Kumirov, B.A.
    Olimpiev, V.V.
    Shinkevich, O.P.
    Thermal Engineering (English translation of Teploenergetika), 1993, 40 (04):
  • [49] INVESTIGATION OF HEAT-TRANSFER AND FRICTION FOR RIB-ROUGHENED SURFACES
    HAN, JC
    GLICKSMAN, LR
    ROHSENOW, WM
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1978, 21 (08) : 1143 - 1156
  • [50] TURBULENT HEAT-TRANSFER AND FRICTION IN A SQUARE CHANNEL WITH DISCRETE RIB TURBULATORS
    LAU, SC
    MCMILLIN, RD
    HAN, JC
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1991, 113 (03): : 360 - 366
12345