Heat transfer and friction characteristics for artificially roughened ducts with compound turbulators

被引：100

作者：

Layek, Apurba ^{[1
]}

Saini, J. S.

Solanki, S. C.

机构：

[1] NIT Durgapur, Dept Mech Engn, Durgapur 713209, India

[2] Indian Inst Technol Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2007年 / 50卷 / 23-24期

关键词：

compound-roughness; heat transfer coefficient; friction factor; chamfer angle and groove position;

D O I：

10.1016/j.ijheatmasstransfer.2007.02.042

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

An experimental investigation on heat and fluid flow characteristics of fully developed turbulent flow in a rectangular duct having repeated integral transverse chamfered rib-groove roughness on one broad wall has been carried out. Experiments encompassed the Reynolds number range of 3000-21,000; relative roughness pitch of 4.5-10, chamfer angle of 5 degrees-30 degrees, relative groove position of 0.3-0.6 and relative roughness height of 0.022-0.04. The effect of roughness parameters on Nusselt number and friction factor have been discussed and the results are compared with the results of square rib-grooved and smooth duct under similar flow conditions. The conditions for the best performance have been determined. Correlations for the Nusselt number and friction factor have been developed as a function of roughness parameters and flow Reynolds number. (c) 2007 Elsevier Ltd. All rights reserved.

引用

页码：4845 / 4854

页数：10

共 50 条

[1] HEAT TRANSFER AND FRICTION CHARACTERISTICS OPTIMIZATION WITH COMPOUND TURBULATORS IN ROUGHENED DUCTS
Kamali, R.
Binesh, A. R.
JOURNAL OF MECHANICS, 2009, 25 (03) : 271 - 278
[2] Heat Transfer and Friction Characteristics of an Artificially Roughened Solar Air Heater
Prasad, Rakesh
Yadav, Anil Singh
Singh, Nishant K.
Johari, Dilip
ADVANCES IN FLUID AND THERMAL ENGINEERING, 2019, : 613 - 626
[3] Effect of chamfering on heat transfer and friction characteristics of solar air heater having absorber plate roughened with compound turbulators
Layek, Apurba
Saini, J. S.
Solanki, S. C.
RENEWABLE ENERGY, 2009, 34 (05) : 1292 - 1298
[4] Heat transfer and friction factor correlations for artificially roughened ducts with expanded metal mesh as roughness element
Saini, RP
Saini, JS
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1997, 40 (04) : 973 - 986
[5] Optimizing of heat transfer and flow characteristics within a roughened solar air heater duct with compound turbulators
Al-Chlaihawi, Kadhim
Alyas, Bahjat Hassan
Abdullah, Banan Najim
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2024, 19 (05)
[6] Heat Transfer and Friction Characteristics of Artificially Roughened Duct used for Solar Air Heaters—a Review
Kumar K.
Prajapati D.R.
Samir S.
Journal of The Institution of Engineers (India): Series C, 2018, 99 (1) : 105 - 123
[7] Heat transfer and friction factor correlations of solar air heater ducts artificially roughened with discrete V-down ribs
Singh, Sukhmeet
Chander, Subhash
Saini, J. S.
ENERGY, 2011, 36 (08) : 5053 - 5064
[8] Heat transfer and fluid flow analysis of artificially roughened ducts having rib and groove roughness
Aharwal, K. R.
Pawar, C. B.
Chaube, Alok
HEAT AND MASS TRANSFER, 2014, 50 (06) : 835 - 847
[9] Heat transfer and fluid flow analysis of artificially roughened ducts having rib and groove roughness
K. R. Aharwal
C. B. Pawar
Alok Chaube
Heat and Mass Transfer, 2014, 50 : 835 - 847
[10] Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs
Karmare, S. V.
Tikekar, A. N.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (21-22) : 4342 - 4351

← 1 2 3 4 5 →