Enhancement in intergranular corrosion resistance of the stabilised ultra-pure 430LX ferritic stainless steel by tin addition

被引：5
|
作者：
Cheng, Peize [1 ]
Dai, Nianwei [1 ]
Zhong, Ning [2 ]
Wu, Xuan [1 ]
Yin, Liqiang [1 ]
Jiang, Yiming [1 ]
Li, Jin [1 ]
机构：
[1] Fudan Univ, Dept Mat Sci, Shanghai 200433, Peoples R China
[2] Shanghai Maritime Univ, Inst Marine Mat Sci & Engn, Shanghai, Peoples R China
来源：
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY | 2020年 / 55卷 / 03期
基金：
中国国家自然科学基金;
关键词：
Ferritic stainless steel; intergranular corrosion; tin addition; TEM; XPS; PASSIVE FILM; SUSCEPTIBILITY; SENSITIZATION; SN; BEHAVIOR; MECHANISM;
D O I：
10.1080/1478422X.2020.1721807
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The intergranular corrosion (IGC) susceptibility of the Ti-Nb-stabilised ultra-pure 430LX FSSs with 0-0.47 wt-% tin addition was investigated using double loop electrochemical potentiokinetic reactivation (DL-EPR) and oxalic acid etch tests. The result of DL-EPR test reveals that IGC resistance increases with the increase in tin content. The specimens with different contents of tin exhibit the same microstructural evolution based on oxalic acid etch test. M23C6 precipitates form along grain boundaries, inducing Cr-depleted zones and finally resulting in the susceptibility to IGC. Tin addition gives rise to the formation of SnO2 on the FSSs surface, thus inhibiting the attack of corrosive ions towards Cr-depleted zones.
引用
收藏
页码：232 / 240
页数：9
相关论文
共 50 条
  • [11] Low molybdenum ultra-pure ferritic stainless steel for solar water heaters
    YU Haifeng~(1))WANG Weiming~(2))YANG Jun~(2))LIU Quanli~(2))GAO Songchao~(2)) WU Weiwei~(3))
    Baosteel Technical Research, 2010, 4 (01) : 19 - 24
  • [12] Precipitation behavior of ultra-pure ferritic stainless steel during hot deformation
    Gao F.
    Liu Z.-Y.
    Yu F.-X.
    Gao, Fei (gaofei181@aliyun.com), 2016, Northeast University (37): : 44 - 48
  • [13] Effect of aluminum on microstructure, mechanical properties and pitting corrosion resistance of ultra-pure 429 ferritic stainless steels
    Zhang, Xin
    Fan, Lijun
    Xu, Yulai
    Li, Jun
    Xiao, Xueshan
    Jiang, Laizhu
    MATERIALS & DESIGN, 2015, 65 : 682 - 689
  • [14] Investigation on ultra-pure ferritic stainless steel 436L susceptibility to intergranular corrosion using optimised double loop electrochemical potentiokinetic reactivation method
    Sun, Jiakun
    Sun, Li
    Dai, Nianwei
    Li, Jin
    Jiang, Yiming
    CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2018, 53 (08) : 574 - 581
  • [15] Effects of titanium content on the large precipitates in 443 ultra-pure ferritic stainless steel
    Chen, Xingrun
    Cheng, Guoguang
    Hou, Yuyang
    CANADIAN METALLURGICAL QUARTERLY, 2021, 60 (04) : 239 - 248
  • [16] Effect of tin on corrosion resistance and formability of tin bearing ferritic stainless steel
    Jiang, Z. H.
    Han, J. P.
    Li, Y.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 9 - 11
  • [17] Effect of Zr addition on intergranular corrosion of low-chromium ferritic stainless steel
    Park, Jin Ho
    Kim, Jeong Kil
    Lee, Bong Ho
    Seo, Hyung Suk
    Kim, Kyoo Young
    SCRIPTA MATERIALIA, 2014, 76 : 77 - 80
  • [18] The effect of copper and molybdenum on pitting corrosion and stress corrosion cracking behavior of ultra-pure ferritic stainless steels
    Shu, Jun
    Bi, Hongyun
    Li, Xin
    Xu, Zhou
    CORROSION SCIENCE, 2012, 57 : 89 - 98
  • [19] Inclusions evolution during the LF refining process of 439 ultra-pure ferritic stainless steel
    Chen, Xingrun
    Cheng, Guoguang
    Hou, Yuyang
    Li, Jingyu
    METALLURGICAL RESEARCH & TECHNOLOGY, 2019, 116 (06)
  • [20] Effect of Hot Band Annealing on Forming Limit Diagrams of Ultra-Pure Ferritic Stainless Steel
    Jun Shu
    Hongyun Bi
    Xin Li
    Zhou Xu
    Journal of Materials Engineering and Performance, 2014, 23 : 982 - 989
12345