Modification and characterisation of terpolymer maleic anhydride-styrene-vinyl acetate by poly(ethylene adipate) copolymer

被引：2
|
作者：
Boztug, A. [1 ]
机构：
[1] Cumhuriyet Univ, Fac Sci & Arts, Dept Chem, TR-58140 Sivas, Turkey
来源：
MATERIALS RESEARCH INNOVATIONS | 2007年 / 11卷 / 04期
关键词：
maleic anhydride; poly(ethylene adipate); modification; functional terpolymer; TMA;
D O I：
10.1179/143307507X246567
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present paper, poly(ethylene adipate) (PEA) copolymer of ethylene glycol/adipic acid was synthesised by the polycondensation in the status without an initiator at 180 degrees C for 5 h. It reacted with the PEA copolymer with maleic anhydride-styrene-vinyl acetate (MA-St-VA) terpolymer without using an initiator at 150 degrees C for 6 h. Thus, MA-St-VA terpolymer was modified by the ring opening method. The original MA-St-VA terpolymer and the modified terpolymer were characterised by Fourier transform infrared spectroscopy (FTIR), thermomechanical analysis (TMA) and the viscosimetric method. It was observed that the modified terpolymer was more elastic than the original terpolymer.
引用
收藏
页码：169 / 172
页数：4
相关论文
共 50 条
  • [31] Synthesis of poly(acrylic acid dodecyl ester-styrene-maleic anhydride) terpolymer and surface modification of glass fiber
    Wang, Jingchang
    Liu, Chunming
    Zhao, Qicheng
    Dong, Xu
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 1645 - 1648
  • [32] Additivation of the ethylene–vinyl acetate copolymer (EVA) with maleic anhydride (MA) and dicumyl peroxide (DCP): the impact of styrene monomer on cross-linking and functionalization
    Carlos Bruno Barreto Luna
    Eduardo da Silva Barbosa Ferreira
    Danilo Diniz Siqueira
    Edson Antonio dos Santos Filho
    Edcleide Maria Araújo
    Polymer Bulletin, 2022, 79 : 7323 - 7346
  • [33] Structure and properties of blends of poly(ethylene-co-vinyl alcohol) with poly(styrene-co-maleic anhydride)
    Tselios, C
    Bikiaris, D
    Prinos, J
    Panayiotou, C
    JOURNAL OF APPLIED POLYMER SCIENCE, 1997, 64 (05) : 983 - 999
  • [34] Additivation of the ethylene–vinyl acetate copolymer (EVA) with maleic anhydride (MA) and dicumyl peroxide (DCP): the impact of styrene monomer on cross-linking and functionalization
    Luna, Carlos Bruno Barreto
    da Silva Barbosa Ferreira, Eduardo
    Siqueira, Danilo Diniz
    dos Santos Filho, Edson Antonio
    Araújo, Edcleide Maria
    Polymer Bulletin, 2022, 79 (09): : 7323 - 7346
  • [35] Chemical modification and thermal characterisation of poly(allylpropionate-alt-maleic anhydride) copolymer modified by hexamethylenediamine
    Zengin, H. Bayram
    Boztug, A.
    Yilmaz, E.
    MATERIALS RESEARCH INNOVATIONS, 2008, 12 (02) : 90 - 93
  • [36] Improving foamability and foam stability of poly(ethylene terephthalate) through chemical modification with styrene maleic anhydride
    Mousavi, Seyed Mousa
    Ahmadi, Shervin
    Rasouli, Sajad
    Fasihi, Mohammad
    JOURNAL OF APPLIED POLYMER SCIENCE, 2024, 141 (37)
  • [37] Fracture Behavior of Poly(trimethylene terephthalate) Toughened by Maleic Anhydride Grafted Styrene-Ethylene-Butadiene-Styrene Block Copolymer
    Du, Xue-chong
    Chen, Hai-ming
    Zhang, Nan
    Yang, Jing-hui
    Huang, Ting
    Wang, Yong
    Zhang, Chao-liang
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2014, 53 (08) : 824 - 833
  • [38] Modification of Poly(Lactic Acid) Rheological Properties Using Ethylene–Vinyl Acetate Copolymer
    Daisuke Kugimoto
    Shingo Kouda
    Masayuki Yamaguchi
    Journal of Polymers and the Environment, 2021, 29 : 121 - 129
  • [39] Synthesis, characterization, microstructure determination and thermal studies of poly(N-vinyl-2-pyrrolidone–maleic anhydride–styrene) terpolymer
    Manayan Parambil Ajithkumar
    Malgar Puttaiahgowda Yashoda
    Shankarappa Prasannakumar
    Iranian Polymer Journal, 2014, 23 : 93 - 101
  • [40] Compatibilisation of blends of poly(vinyl chloride) and poly(styrene-block-(ethylene-cobutadiene)-block-styrene) with maleic anhydride grafting
    Chen, X. H.
    Sheng, J.
    Peng, S. X.
    Li, C. Q.
    PLASTICS RUBBER AND COMPOSITES, 2006, 35 (03) : 124 - 128
12345