SCREW HOLDING PERFORMANCE OF PANELS MADE OF FIBROUS CHIPS

被引：0
|
作者：
Kowaluk, Grzegorz [1 ]
Fuczek, Dorota [1 ]
机构：
[1] Wood Technol Inst, Poznan, Poland
来源：
DREWNO | 2010年 / 53卷 / 184期
关键词：
particleboard; fibrous chips; screw; withdrawal resistance; SWR; willow; black locust; WITHDRAWAL RESISTANCE;
D O I：
暂无
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
The aim of the research was to investigate the face screw withdrawal resistance of panels produced from fibrous chips of willow Salix Viminalis L. and black locust Robinia Pseudoacacia L. A series of laboratory 3-layer panels were produced from fibrous chips as well as from industrial particles. The results were compared to commercial industrial panel performance. The investigation shows that the panels from black locust have lower screw withdrawal resistance in comparison with the industrial panel. In the case of higher density willow panel the screw withdrawal resistance was better than that of the industrial panel.
引用
收藏
页码：77 / 81
页数：5
相关论文
共 50 条
  • [31] Characterization on Polyester Fibrous Panels and Their Homogeneity Assessment
    Yang, Tao
    Saati, Ferina
    Groby, Jean-Philippe
    Xiong, Xiaoman
    Petru, Michal
    Mishra, Rajesh
    Militky, Jiri
    Marburg, Steffen
    POLYMERS, 2020, 12 (09)
  • [32] Composite panels reinforced with waste fibrous materials
    Gomes, M. G.
    Fangueiro, R.
    Pereira, C. Gonilho
    PORTUGAL SB07 - SUSTAINABLE CONSTRUCTION, MATERIALS AND PRACTICES: CHALLENGE OF THE INDUSTRY FOR THE NEW MILLENNIUM, PTS 1 AND 2, 2007, : 905 - +
  • [33] Structural performance of light steel framing panels using screw connections subjected to lateral loading
    Henriques, J.
    Rosa, N.
    Gervasio, H.
    Santos, P.
    Simoes da Silva, L.
    THIN-WALLED STRUCTURES, 2017, 121 : 67 - 88
  • [34] Soundproofing performance evaluation of panels made of fibers of acrylonitrile butadiene styrene copolymer (ABS)
    Stanciu, Mariana Domnica
    Curtu, Ioan
    Cosereanu, Camelia
    Lica, Dumitru
    8TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2014, 2015, 19 : 260 - 267
  • [35] Investigation and evaluation of the performance of interior finishing panels made from denim textile waste
    Juciene, Milda
    Dobilaite, Vaida
    Albrektas, Darius
    Bliudzius, Raimondas
    TEXTILE RESEARCH JOURNAL, 2022, 92 (23-24) : 4666 - 4677
  • [36] Energy performance of buildings made of textile-reinforced concrete (TRC) sandwich panels
    Vatin, N.
    Korniyenko, S. V.
    MAGAZINE OF CIVIL ENGINEERING, 2022, 113 (05):
  • [37] Ballistic performance of sandwich panels made of wood/plastic/metal and woven glass fiber
    Sozen, Eser
    Gunduz, Gokhan
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2021, 23 (05) : 1808 - 1825
  • [38] POLICIES AND STRATEGIES TO IMPROVE THE ENVIRONMENTAL PERFORMANCE OF RESIDENTIAL BUILDINGS MADE OF PREFABRICATED PANELS IN ROMANIA
    Szitar, Mirela-Adriana
    Grecea, Daniel-Mihai
    Veronescu, Otilia-Alexandra
    12th International Multidisciplinary Scientific Geoconference, SGEM 2012, Vol. V, 2012, : 1143 - 1150
  • [39] SCREW HOLDING CAPACITY OF MEDIUM HARD FIBERBOARD AND PARTICLEBOARD
    TROGER, F
    MEINDL, K
    HOLZ ALS ROH-UND WERKSTOFF, 1984, 42 (04) : 153 - 153
  • [40] SOME STUDIES ON NAIL AND SCREW HOLDING POWER OF TIMBER
    GUPTA, VK
    SHUKLA, NK
    RAJPUT, SS
    HOLZFORSCHUNG UND HOLZVERWERTUNG, 1985, 37 (01): : 6 - 8
12345