Effects of Electric Pulse Modification on the Hot Tearing of Al-5%Cu-0.8%Mn Alloy

被引：1
|
作者：
Wang, Bing [1 ]
Tang, Lidan [1 ]
Wang, Jianzhong [1 ]
Qi, Jingang [1 ]
机构：
[1] Liaoning Univ Technol, Dept Mat Sci & Engn, Jinzhou 121001, Peoples R China
来源：
MATERIALS AND MANUFACTURING, PTS 1 AND 2 | 2011年 / 299-300卷
关键词：
hot tearing; electric pulse modification; refining;
D O I：
10.4028/www.scientific.net/AMR.299-300.399
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It was investigated that the effect of electric pulse modification (EPM) on the hot tearing of Al-5%Cu-0.8%Mn alloy. The results indicate that hot tearing tendency of all samples can be reduced treated by electric pulse with different parameters, moreover, hot tearing stress of alloy with EPM was enhanced 3 times or so than that of samples without treatment. Decreasing the quantity of eutectic in grain boundaries, decreasing the end-solidifying temperature of the alloys, and refining the grains are main causations for increasing hot tearing resistance of Al-5%Cu-0.8%Mn alloy by electric pulse modification.
引用
收藏
页码：399 / 402
页数：4
相关论文
共 50 条
  • [41] Solidification analysis of Al-5 wt-%Cu alloy using in situ neutron diffraction
    D'Elia, F.
    Ravindran, C.
    Sediako, D.
    Donaberger, R.
    CANADIAN METALLURGICAL QUARTERLY, 2015, 54 (01) : 9 - 15
  • [42] Evolution of the temperature, microstructures and microsegregation in equiaxed solidification of Al-5 wt.% Cu alloy
    Ma, Xiaoping
    Li, Dianzhong
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2017, 108 (05) : 364 - 377
  • [43] Effect of Hot Rolling on Grain Refining Performance of Al–5Ti–1B Master Alloy on Hot Tearing on Al–7Si–3Cu Alloy
    Sachin Kumar Rathi
    Ashok Sharma
    Marisa Di Sabatino
    Transactions of the Indian Institute of Metals, 2018, 71 : 3089 - 3093
  • [44] Effect of Cu on the Hot Tearing Susceptibility of Al-6Zn-2.5Mg-xCu Alloy
    Chen, Yongqiang
    Liu, Zheng
    Liu, Shimeng
    Guo, Hui
    Liu, Jia
    Sheng, Xiaofang
    INTERNATIONAL JOURNAL OF METALCASTING, 2021, 15 (01) : 130 - 140
  • [45] Microstructure and Hot Tearing Sensitivity Simulation and Parameters Optimization for the Centrifugal Casting of Al-Cu Alloy
    He, Xueli
    Lv, Shengkun
    Dou, Ruifeng
    Zhang, Yanying
    Wang, Junsheng
    Liu, Xunliang
    Wen, Zhi
    CMC-COMPUTERS MATERIALS & CONTINUA, 2024, 80 (02): : 2873 - 2895
  • [46] Performance of Al-5Ti-1B Master Alloy After Ball Milling on Minimizing Hot Tearing in Al-7Si-3Cu Alloy
    Rathi, Sachin Kumar
    Sharma, Ashok
    Di Sabatino, Marisa
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (03) : 827 - 831
  • [47] Effect of Ce on Hot Tearing Sensitivity of As-Cast Al-Cu-Mg-Y Alloy
    Wang, Yuxiang
    Yue, Chunyu
    Su, Ming
    Yuan, Xiaoguang
    Zheng, Bowen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (08) : 6349 - 6359
  • [48] SHAPE MEMORY EFFECTS IN A CU-AL-MN ALLOY
    MELLOR, BG
    HERNAEZ, J
    DELCASTILLO, CL
    SCRIPTA METALLURGICA, 1986, 20 (06): : 839 - 841
  • [49] Effect of Ce on Hot Tearing Sensitivity of As-Cast Al-Cu-Mg-Y Alloy
    Yuxiang Wang
    Chunyu Yue
    Ming Su
    Xiaoguang Yuan
    Bowen Zheng
    Journal of Materials Engineering and Performance, 2022, 31 : 6349 - 6359
  • [50] Hot tearing susceptibility and fluidity of semi-solid gravity cast Al-Cu alloy
    Wannasin, J.
    Schwam, D.
    Yurko, J. A.
    Rohloff, C.
    Woycik, G.
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, 2006, 116-117 : 76 - 79
12345