The Numerical Prediction and Analysis of Propeller Cavitation Benchmark Tests of YUPENG Ship Model

被引:15
|
作者
Zheng, Chaosheng [1 ,2 ]
Liu, Dengcheng [1 ,2 ]
Huang, Hongbo [1 ,2 ]
机构
[1] China Ship Sci Res Ctr, Wuxi 214082, Jiangsu, Peoples R China
[2] Jiangsu Key Lab Green Ship Technol, Wuxi 214082, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
numerical simulation; propeller cavitation; benchmark tests; YUPENG;
D O I
10.3390/jmse7110387
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The numerical simulation of propeller cavitation benchmark tests of YUPENG ship model is studied based on OpenFOAM, an open-source CFD (Computational Fluid Dynamics) platform, and the benchmark tests are introduced as well. The propeller cavitation shape and the hull pressure fluctuation are measured and predicted, respectively. The uncertainty in hull pressure fluctuation measurement is also analyzed, and the analysis showed the uncertainty is below 10%. The cavitation shape and the hull pressure fluctuation predicted show quite good agreement with the observations and measured data, and the influences of the grid resolutions on the unsteady propeller cavitation and the hull pressure fluctuation are investigated as well. The monotonic convergence achieved and the quite small grid uncertainty illustrate the reliability of the numerical simulation methods.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Numerical prediction of scale effect on propeller bearing force of a four-screw ship
    Sun, Shuai
    Hu, Zhiqiang
    Wang, Chao
    Guo, Zeqing
    Li, Xiang
    OCEAN ENGINEERING, 2021, 229
  • [32] Numerical simulation of the ship self-propulsion prediction using body force method and fully discretized propeller model
    Bekhit, A. S.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
  • [33] Cavitation visualization and prediction of propeller characteristics of INSEAN E779A propeller using sliding mesh model
    Rastogi, Ashutosh
    Mathew, M. P.
    OCEANS 2022, 2022,
  • [34] Cavitation erosion prediction on Francis turbines .2. Model tests and flow analysis
    Dupont, PH
    Caron, JF
    Avellan, F
    Bourdon, P
    Lavigne, P
    Farhat, M
    Simoneau, R
    Dorey, JM
    Archer, A
    Laperrousaz, E
    Couston, M
    HYDRAULIC MACHINERY AND CAVITATION, VOLS I AND II, 1996, : 574 - 583
  • [35] A Study on the Cavitation Model for the Cavitating Flow Analysis around the Marine Propeller
    Lee, Insu
    Park, Sunho
    Seok, Woochan
    Rhee, Shin Hyung
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2021, 2021
  • [36] Uncertainty analysis of open water tests for propeller model
    Zhang, Li
    Chen, Jianting
    Chen, Weimin
    Yuan, Zhijiang
    Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2021, 49 (04): : 56 - 60
  • [37] Numerical analysis of effect of asymmetric stern of ship on its screw propeller efficiency
    Abramowski, Tomasz
    Zelazny, Katarzyna
    Szelangiewicz, Tadeusz
    POLISH MARITIME RESEARCH, 2010, 17 (04) : 13 - 16
  • [38] Experimental and numerical analysis of cavitation and pressure fluctuations in large high head propeller turbine
    Ocepek, Matic
    Persin, Zlatko
    Kern, Igor
    Djelic, Vesko
    Muhic, Simon
    Lipej, Andrej
    IAHR INTERNATIONAL WORKSHOP ON CAVITATION AND DYNAMIC PROBLEMS IN HYDRAULIC MACHINERY AND SYSTEMS, 2019, 405
  • [39] Numerical prediction of cavitation in centrifugal pump using Multi-Process cavitation model
    Yamada, Akihisa
    Ino, Takeshi
    Tsuda, Shin-ichi
    Watanabe, Satoshi
    Takamine, Taiki
    JOURNAL OF FLUID SCIENCE AND TECHNOLOGY, 2024, 19 (02):
  • [40] Numerical prediction of propulsion factors of propelled ship model and full scale ship
    Xiong, Ying
    Liu, Zhi-Hua
    Chuan Bo Li Xue/Journal of Ship Mechanics, 2013, 17 (1-2): : 14 - 18