Condensation heat transfer coefficients for R22 and R407C in gravity driven flow regime within a smooth horizontal tube

被引:42
|
作者
Aprea, C
Greco, A
Vanoli, GP
机构
[1] Univ Naples Federico II, DETEC, I-80125 Naples, Italy
[2] Univ Salerno, Dipartimento Ingn Meccan, I-84084 Salerno, Italy
[3] Univ Sannio, Fac Ingn, Benevento, Italy
关键词
R22; R407C; heat transfer; mass tranfer; condensation; flow; gravity; smooth tube; inside; measurement;
D O I
10.1016/S0140-7007(02)00151-2
中图分类号
O414.1 [热力学];
学科分类号
摘要
The quasi local heat transfer coefficients of R22 and R407C in the coaxial counterflow condenser (20 mm ID) of a refrigerating vapour compression plant have been experimentally measured. The experimental conditions under which the heat transfer coefficients were determined reflect a typical working situation for small scale refrigeration systems. The plant runs with low mass fluxes of refrigerant within the range of 45.5-120 kg/m(2)/S. During the experimental tests the pressure at the inlet of the test condenser varies within a fixed range between 15.2 and 14.3 bar. The results illustrate that the R22 heat transfer coefficient is always greater than that of R407C. Furthermore, comparisons between the experimental data and the values predicted by means of the most credited literature relationships for gravity-driven condensation are reported. (C) 2003 Elsevier Science Ltd and IIR. All rights reserved.
引用
收藏
页码:393 / 401
页数:9
相关论文
共 50 条
  • [41] Experimental investigation on mass flow characteristics of electronic expansion valves with R22, R410A and R407C
    Chen Liang
    Chen Jiangping
    Liu Jinghui
    Chen Zhijiu
    ENERGY CONVERSION AND MANAGEMENT, 2009, 50 (04) : 1033 - 1039
  • [42] Performance evaluation of R22 and R407C in a vapour compression plant with reciprocating compressor
    Aprea, C
    Greco, A
    APPLIED THERMAL ENGINEERING, 2003, 23 (02) : 215 - 227
  • [43] Flow patterns and heat transfer coefficients in flow-boiling and convective condensation of R22 inside a microfin tube of new design
    Muzzio, A
    Niro, A
    Garavaglia, M
    HEAT TRANSFER 1998, VOL 2: GENERAL PAPERS, 1998, : 291 - 296
  • [44] Evaporating heat transfer of R22 and R410A in horizontal smooth and microtin tubes
    Kim, MH
    Shin, JS
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2005, 28 (06): : 940 - 948
  • [45] Heat transfer with refrigerant R22 boiling in horizontal smooth and finned tubes
    Rifert, VG
    Gorin, VV
    Ozimay, SS
    Zolotuhin, IV
    HEAT TRANSFER 1998, VOL 2: GENERAL PAPERS, 1998, : 345 - 350
  • [46] Prediction model of flow boiling heat transfer for R407C inside horizontal smooth tubes based on RBF neural network
    Wen, Xu-Lin
    Wang, Hui-Tao
    Wang, Hua
    INTERNATIONAL CONFERENCE ON ADVANCES IN COMPUTATIONAL MODELING AND SIMULATION, 2012, 31 : 233 - 239
  • [47] Flow boiling heat transfer of R407C in a microchannels based heat spreader
    Souza Lara Leao, Hugo Leonardo
    do Nascimento, Francisco Julio
    Ribatski, Gherhardt
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 59 : 140 - 151
  • [48] Analysis on the adiabatic flow of R407C in capillary tube
    Gu, B
    Li, YG
    Wang, ZY
    Jing, BY
    APPLIED THERMAL ENGINEERING, 2003, 23 (15) : 1871 - 1880
  • [49] Exergy efficiency and irreversibility comparison of R22, R134a, R290 and R407C to replace R22 in an air conditioning system
    Padmanabhan, Venkataramana Murthy V.
    Palanisamy, Senthil Kumar
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (03) : 917 - 926
  • [50] R22制冷系统采用R407C后的设计改进
    陈政文
    制冷与空调, 2005, (05) : 94 - 95