Symmetric electrodes for solid oxide fuel cells based on Zr-doped SrFeO3-δ

被引:77
|
作者
dos Santos-Gomez, L. [1 ]
Compana, J. M. [1 ]
Bruque, S. [1 ]
Losilla, E. R. [1 ]
Marrero-Lopez, D. [2 ]
机构
[1] Univ Malaga, Dept Quim Inorgan, E-29071 Malaga, Spain
[2] Univ Malaga, Dept Fis Aplicada 1, Lab Mat & Super, E-29071 Malaga, Spain
关键词
Solid oxide fuel cells; Cathode; Anode; SrFeO3-delta; OXYGEN REDUCTION; CATHODE MATERIAL; HIGH-TEMPERATURE; SOFC CATHODES; TRANSPORT; ANODE; CONDUCTIVITY; PERFORMANCE; LA0.75SR0.25CR0.5MN0.5O3-DELTA; NONSTOICHIOMETRY;
D O I
10.1016/j.jpowsour.2015.01.043
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
SrFe1-xZrxO3-delta, (0 <= x <= 035) compounds have been investigated as potential symmetric electrode materials for solid oxide fuel cells (SOFCs). The crystal structure changes from orthorhombic to cubic perovskite when iron is partially replaced by Zr4+. The compounds with Zr-content x >= 0.1 are structurally stable under reducing atmospheres up to 800 degrees C. The oxygen nonstoichiometry and thermal expansion coefficients of the compounds are determined by thermogravimetric analysis and high temperature X-ray diffraction respectively, and both decrease with increasing Zr-content, indicating that Zr4+ improves the redox stability of SrFeO3-delta. Total conductivity and area specific resistance (ASR) are determined in air and 5% H-2-Ar. SrFe0.75Zr0.25O3-delta exhibits ASR values as low as 0.1 and 0.17 Omega scm(2) in air and 5% H-2-Ar at 750 degrees C respectively. The performance of these compounds as both cathode and anode materials is tested in a single cell with 400 pm-thick La0.8Sr0.2Ga0.8Mg0.2O3-delta (LSGM) electrolyte, reaching a maximum power density of 425 mW cm(-2) at 800 degrees C. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:419 / 427
页数:9
相关论文
共 50 条
  • [41] Infiltrated Nanofiber-Based Nanostructured Electrodes for Solid Oxide Fuel Cells
    Kim, Seo Ju
    Choi, Mingi
    Mun, Taeeun
    Woo, Deok Yoon
    Lee, Wonyoung
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2023, 2023
  • [42] Sputter deposition of cermet fuel electrodes for solid oxide fuel cells
    Tsai, T.
    Barnett, S.A.
    Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1995, 13 (3 pt 1):
  • [43] THE CHARACTERIZATION OF DOPED CEO2 ELECTRODES IN SOLID OXIDE FUEL-CELLS - REPLY
    POUND, BG
    SOLID STATE IONICS, 1993, 61 (04) : 281 - 284
  • [44] THE CHARACTERIZATION OF DOPED CEO2 ELECTRODES IN SOLID OXIDE FUEL-CELLS - COMMENT
    RANLOV, J
    POULSEN, FW
    MOGENSEN, M
    SOLID STATE IONICS, 1993, 61 (04) : 277 - 279
  • [45] Sputter deposition of cermet fuel electrodes for solid oxide fuel cells
    Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208, United States
    J. Vac. Sci. Technol. A Vac. Surf. Films, 3 (1073-1077):
  • [46] Water interaction with B-site (B = Al, Zr, Nb, and W) doped SrFeO3-δ-based perovskite surfaces for thermochemical water splitting applications
    Chen, Sha
    Cheng, Hongwei
    Liu, Yanbo
    Xiong, Xiaolu
    Sun, Qiangchao
    Xu, Qian
    Lu, Xionggang
    Li, Shenggang
    PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2022, 24 (47) : 28975 - 28983
  • [47] Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells
    Trini, M.
    Hauch, A.
    De Angelis, S.
    Tong, X.
    Hendriksen, P. Vang
    Chen, M.
    JOURNAL OF POWER SOURCES, 2020, 450
  • [48] Film percolation for composite electrodes of solid oxide fuel cells
    Zhang, Yanxiang
    Xia, Changrong
    ELECTROCHIMICA ACTA, 2011, 56 (13) : 4763 - 4769
  • [49] Molten-Metal Electrodes for Solid Oxide Fuel Cells
    Jayakumar, A.
    Vohs, J. M.
    Gorte, R. J.
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2010, 49 (21) : 10237 - 10241
  • [50] Stability and Performance of Solid Oxide Fuel Cells with Nanocomposite Electrodes
    Buyukaksoy, Aligul
    Petrovsky, Vladimir
    Dogan, Fatih
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2012, 159 (06) : B666 - B669