Notched strengths of asymmetric woven hybrid laminates

被引：0
|
作者：
Tsai, Kun-Hsieh [1 ]
Hwan, Chung-Li [2 ]
Lin, Meng-Ju [2 ]
Chiu, Chang-Hsuan [1 ]
机构：
[1] Feng Chia Univ, Dept Fiber & Composite Mat, Taichung, Taiwan
[2] Feng Chia Univ, Dept Mech & Comp Aided Engn, 100 Wenhwa Rd, Taichung 40724, Taiwan
来源：
POLYMERS & POLYMER COMPOSITES | 2020年 / 28卷 / 03期
关键词：
Woven hybrid laminate; point stress criterion; characteristic length; hole; BRAIDED COMPOSITE PLATES; FRACTURE CRITERION; ELASTIC PROPERTIES; PREDICTION; HOLES;
D O I：
10.1177/0967391119872123
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this article, the notched strengths of asymmetric woven hybrid laminates were studied by using both experiment and the finite element-based point stress criterion (FEMPSC). It was experimentally shown that the notched strength decreases with the increase of hole radius for all the laminates machined by water jet cut, drilling, and milling. Particularly, it is noted that the notched strength of specimens of the same hole size made by water jet cut is obviously higher than those made by both drilling and milling, due to stress redistribution. The results also indicate that the notched strengths predicted by FEMPSC agree well with the experimental data, with only a 4% margin of error.
引用
收藏
页码：151 / 158
页数：8
相关论文
共 50 条
  • [41] Characterization of the fracture process of notched glass fiber/aluminum hybrid laminates by acoustic emission
    Woo, Sung-Choong
    Choi, Nak-Sam
    Cho, Nahmgyoo
    COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (06) : 1521 - 1530
  • [42] Notched three-point bend testing of GFRP woven laminates at cryogenic temperatures and analysis of fracture and damage properties
    Sanada, K.
    Shindo, Y.
    ADVANCES IN CRYOGENIC ENGINEERING, VOL 52A & 52B, 2006, 824 : 264 - +
  • [43] Tensile failure for notched unidirectional laminates
    Zeng, Qingdun
    Li, Dongmei
    Tan, Chasheng
    FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 153 - +
  • [44] The notched strength of angle ply laminates
    Piggott, MR
    Zhang, W
    2001: A MATERIALS AND PROCESSES ODYSSEY, BOOKS 1 AND 2, 2001, 46 : 2321 - 2327
  • [45] SUPERPOSITION OF THE NOTCHED STRENGTH OF COMPOSITE LAMINATES
    PIPES, RB
    GILLESPIE, JW
    WETHERHOLD, RC
    POLYMER ENGINEERING AND SCIENCE, 1979, 19 (16): : 1151 - 1155
  • [46] FAILURE STRENGTH OF NOTCHED COMPOSITE LAMINATES
    LO, KH
    WU, EM
    KONISHI, DY
    JOURNAL OF COMPOSITE MATERIALS, 1983, 17 (05) : 384 - 398
  • [47] SUPERPOSITION OF THE NOTCHED STRENGTH OF COMPOSITE LAMINATES
    PIPES, RB
    GILLESPIE, JW
    WETHERHOLD, RC
    JOURNAL OF RHEOLOGY, 1980, 24 (06) : 886 - 887
  • [48] Fatigue damage growth in notched laminates
    Muc, A.
    Chwal, M.
    Kedziora, P.
    2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS, 2019, 544
  • [49] Notched CFRP laminates under vibration
    Capozucca, R.
    Bonci, B.
    COMPOSITE STRUCTURES, 2015, 122 : 367 - 375
  • [50] FATIGUE DAMAGE IN NOTCHED COMPOSITE LAMINATES
    KULKARNI, SV
    MCLAUGHLIN, PV
    MATERIALS SCIENCE AND ENGINEERING, 1977, 30 (02): : 113 - 120
12345