Corrosion fatigue assessment of creep-resistant magnesium alloys DieMag422 and AE42

被引：12
|
作者：
Klein, Martin [1 ]
Frieling, Gerrit [1 ]
Walther, Frank [1 ]
机构：
[1] TU Dortmund Univ, Dept Mat Test Engn WPT, Baroper Str 303, D-44227 Dortmund, Germany
来源：
ENGINEERING FRACTURE MECHANICS | 2017年 / 185卷
关键词：
Magnesium alloys; Crack initiation; Environmentally assisted cracking; Corrosion potential response; DIE-CASTING ALLOYS; CHLORIDE SOLUTION; BEHAVIOR; BARIUM;
D O I：
10.1016/j.engfracmech.2017.02.024
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Corrosion fatigue behaviors of creep-resistant magnesium alloys DieMag422 and AE42 were characterized by means of lifetime-and process-oriented approaches. Fatigue properties of both materials were assessed in constant amplitude tests at several adjusted corrosion rates. Deterioration and cracking mechanisms were identified and monitored by means of corrosion potential response analysis during constant amplitude tests. Reduction of corrosion fatigue strength could be quantitatively correlated with adjusted corrosion rates. Analysis of corrosion potential response revealed characteristic deterioration and cracking mechanisms for LCF and HCF regime. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：33 / 45
页数：13
相关论文
共 50 条
  • [31] Evaluation of hot cracking in AZ91E and AE42 magnesium alloys
    D'Elia, F.
    Ravindran, C.
    Rao, K. Prasad
    CANADIAN METALLURGICAL QUARTERLY, 2012, 51 (03) : 346 - 355
  • [32] Tribological Characterization of AZ91 and AE42 Magnesium Alloys in Fretting Contact
    Khabale, D.
    Wani, M. F.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (01):
  • [33] A comparative study of the microstructures and creep behavior of AE42 and AE44 die-casting alloys
    Zhu, S. M.
    Gibson, M. A.
    Nie, J. F.
    Easton, M. A.
    Bakke, Per
    MAGNESIUM TECHNOLOGY 2008, 2008, : 437 - +
  • [34] Data Assessment Method to Support the Development of Creep-Resistant Alloys
    Wenzlick, Madison
    Bauer, Jennifer R.
    Rose, Kelly
    Hawk, Jeffrey
    Devanathan, Ram
    INTEGRATING MATERIALS AND MANUFACTURING INNOVATION, 2020, 9 (01) : 89 - 102
  • [35] Data Assessment Method to Support the Development of Creep-Resistant Alloys
    Madison Wenzlick
    Jennifer R. Bauer
    Kelly Rose
    Jeffrey Hawk
    Ram Devanathan
    Integrating Materials and Manufacturing Innovation, 2020, 9 : 89 - 102
  • [36] Substantially Higher Corrosion Resistance in AE42 Magnesium Alloy through Corrosion Layer Stabilization by ECAP Treatment
    Minarik, P.
    Kral, R.
    Hadzima, B.
    ACTA PHYSICA POLONICA A, 2012, 122 (03) : 614 - 617
  • [37] Study of thermally activated dislocation motion in AJ51 and AE42 magnesium alloys
    Lukac, P.
    Trojanova, Z.
    15TH INTERNATIONAL CONFERENCE ON THE STRENGTH OF MATERIALS (ICSMA-15), 2010, 240
  • [38] Superplastic deformation of fine-grained AE42 and LAE442 magnesium alloys
    Minarik, P.
    Vavra, T.
    Strasky, J.
    Hadzima, B.
    Kral, R.
    LETTERS ON MATERIALS, 2018, 8 (04): : 538 - 542
  • [39] Development of creep-resistant magnesium casting alloys for high temperature automotive applications
    Han, L.
    Hu, H.
    Northwood, D. O.
    HIGH PERFORMANCE STRUCTURES AND MATERIALS IV, 2008, 97 : 53 - 62
  • [40] Low Temperature Plasticity of Ultrafine-Grained AE42 and AZ31 Magnesium Alloys
    Shumilin, Sergii Eduardovich
    Janecek, Milos
    Isaev, Nikolai Vasilievich
    Minarik, Peter
    Kral, Robert
    ADVANCED ENGINEERING MATERIALS, 2013, 15 (05) : 352 - 357
12345