Extendibility of traditional perpendicular magnetic recording for hard disk drives

被引:1
|
作者
Bain, James A. [1 ]
Kumar, B. V. K. Vijaya [1 ]
Cai, Yu [1 ]
Jeon, Seungjune [1 ]
Mai, Ken [1 ]
Messner, William [2 ]
Sim, Cheow Hin [1 ]
Wang, Yiming [1 ]
Zhu, Jian-Gang [1 ]
机构
[1] Carnegie Mellon Univ, Dept Elect & Comp Engn, Pittsburgh, PA 15213 USA
[2] Carnegie Mellon Univ, Dept Mech Engn, Pittsburgh, PA 15213 USA
关键词
LDPC; MEDIA; CODES;
D O I
10.1063/1.3563095
中图分类号
O59 [应用物理学];
学科分类号
摘要
We present an analysis of the extendability of traditional perpendicular recording based on micromagnetic recording simulation and channel cost/performance analysis. The analysis indicates that head field gradient is the single most important factor in realizing densities above 1.0 Tb/in(2). The conclusion of this analysis is that 1.5 Tb/in(2) may be possible with this technology, but 2 Tb/in(2) will be extremely challenging, perhaps impossible even with powerful channel chips. We also examine the extendibility of servo systems, and conclude that either actuator bandwidth must be increased by a factor of 2 from today's drives or integrated disturbance power spectrum must be decreased by a factor of 2 to reach densities of 2 Tb/in(2) and beyond. (C) 2011 American Institute of Physics. [doi:10.1063/1.3563095]
引用
收藏
页数:3
相关论文
共 50 条
  • [21] History of magnetic disk storage based on perpendicular magnetic recording
    Hoagland, AS
    IEEE TRANSACTIONS ON MAGNETICS, 2003, 39 (04) : 1871 - 1875
  • [22] AN EXPERIMENT OF VIDEO RECORDING BY PERPENDICULAR MAGNETIC FLEXIBLE DISK
    NUMAZAWA, J
    YONEDA, Y
    YOKOYAMA, K
    IEEE TRANSACTIONS ON MAGNETICS, 1987, 23 (01) : 218 - 223
  • [23] Recording characteristics of perpendicular hard disk media measured by MIG head
    Onodera, S.
    Ouchi, K.
    Nakamura, Y.
    Iwasaki, S.
    IEEE translation journal on magnetics in Japan, 1992, 7 (01): : 10 - 16
  • [24] Commercial TMR heads for hard disk drives:: Characterization and extendibility at 300 Gbit/in2
    Mao, SN
    Chen, YH
    Liu, F
    Chen, XF
    Xu, B
    Lu, PL
    Patwari, M
    Xi, HW
    Chang, C
    Miller, B
    Menard, D
    Pant, B
    Loven, J
    Duxstad, K
    Li, SP
    Zhang, ZY
    Johnston, A
    Lamberton, R
    Gubbins, M
    McLaughlin, T
    Gadbois, J
    Ding, J
    Cross, B
    Xue, S
    Ryan, P
    IEEE TRANSACTIONS ON MAGNETICS, 2006, 42 (02) : 97 - 102
  • [25] Strain imaging of a magnetic layer formed on an air bearing surface of a hard disk drive head for perpendicular recording
    Takata, Keiji
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2009, 27 (02): : 997 - 1000
  • [26] Development of high density magnetic recording media for hard disk drives: materials science issues and challenges
    Qin, G. W.
    Ren, Y. P.
    Xiao, N.
    Yang, B.
    Zuo, L.
    Oikawa, K.
    INTERNATIONAL MATERIALS REVIEWS, 2009, 54 (03) : 157 - 179
  • [27] Impact of radius and skew angle on areal density in heat assisted magnetic recording hard disk drives
    Cordle, Michael
    Rea, Chris
    Jury, Jason
    Rausch, Tim
    Hardie, Cal
    Gage, Edward
    Victora, R. H.
    AIP ADVANCES, 2018, 8 (05)
  • [28] Current-in-plane GMR trilayer head design for hard-disk drives: Characterization and extendibility
    Lamberton, Robert
    Seigler, Michael
    Pelhos, Kalman
    Zhou, Hua
    McCurry, Martin
    Ormston, Marcus
    Yi, Gary
    McClean, Gregor
    McLaughlin, Tom
    Kolbo, Paul
    Heininen, Olle
    Sapozhnikov, Victor
    Mao, Sining
    IEEE TRANSACTIONS ON MAGNETICS, 2007, 43 (02) : 645 - 650
  • [29] State-of-the-Art Magnetic Hard Disk Drives
    I. R. McFadyen
    E. E. Fullerton
    M. J. Carey
    MRS Bulletin, 2006, 31 : 379 - 383
  • [30] Active magnetic inertia latch for hard disk drives
    Shin, Bu Hyun
    Kim, Kyung-Ho
    Lee, Seung-Yop
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2011, 17 (01): : 127 - 132