Transport simulations of linear plasma generators with the B2.5-Eirene and EMC3-Eirene codes

被引:38
|
作者
Rapp, J. [1 ]
Owen, L. W. [1 ]
Bonnin, X. [2 ]
Caneses, J. F. [3 ]
Canik, J. M. [1 ]
Corr, C. [3 ]
Lore, J. D. [1 ]
机构
[1] Oak Ridge Natl Lab, Oak Ridge, TN 37830 USA
[2] Univ Paris 13, LSPM CNRS, Sorbonne Paris Cite, F-93430 Villetaneuse, France
[3] Australian Natl Univ, PRL, Res Sch Phys & Engn, Canberra, ACT, Australia
关键词
MAGNUM-PSI; B2-EIRENE;
D O I
10.1016/j.jnucmat.2014.12.058
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Linear plasma generators are cost effective facilities to simulate divertor plasma conditions of present and future fusion reactors. The codes B2.5-Eirene and EMC3-Eirene were extensively used for design studies of the planned Material Plasma Exposure eXperiment (MPEX). Effects on the target plasma of the gas fueling and pumping locations, heating power, device length, magnetic configuration and transport model were studied with B2.5-Eirene. Effects of tilted or vertical targets were calculated with EMC3-Eirene and showed that spreading the incident flux over a larger area leads to lower density, higher temperature and off-axis profile peaking in front of the target. The simulations indicate that with sufficient heating power MPEX can reach target plasma conditions that are similar to those expected in the ITER divertor. B2.5-Eirene simulations of the MAGPIE experiment have been carried out in order to establish an additional benchmark with experimental data from a linear device with helicon wave heating. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:510 / 514
页数:5
相关论文
共 50 条
  • [41] Implementation and first application of EMC3-EIRENE to EAST double-null divertor
    Huang, J.
    Feng, Y.
    Wan, B.
    Liu, S.
    Chang, J.
    Wang, H.
    Gao, W.
    Zhang, L.
    Gao, W.
    Chen, Y.
    Wu, Z.
    Wu, C.
    PLASMA PHYSICS AND CONTROLLED FUSION, 2014, 56 (07)
  • [42] EMC3-EIRENE modelling of edge plasma and impurity emissions compared with the liquid lithium limiter experiment on EAST
    Xie, T.
    Dai, S. Y.
    Zuo, G. Z.
    Wang, L.
    Zhang, H. M.
    Lyu, B.
    Zhang, L.
    Huang, J.
    Hu, J. S.
    Feng, Y.
    Wang, D. Z.
    NUCLEAR FUSION, 2018, 58 (10)
  • [43] Validating the 3D edge code EMC3-EIRENE against 2D simulations with EDGE2D-EIRENE for JET single null configurations
    Harting, D.
    Wiesen, S.
    Frerichs, H.
    Reiter, D.
    Boerner, P.
    Feng, Y.
    JOURNAL OF NUCLEAR MATERIALS, 2011, 415 (01) : S540 - S544
  • [44] Application of EMC3-EIRENE to Estimation of Influence of a Liquid Metal Limiter on an LHD-Type Fusion Plasma
    Kawamura, Gakushi
    Miyazawa, Junichi
    Goto, Takuya
    Shoji, Mamoru
    Masuzaki, Suguru
    Suzuki, Yasuhiro
    Feng, Yuhe
    PLASMA AND FUSION RESEARCH, 2018, 13
  • [45] Effect of magnetic perturbation fields on power decay length in EMC3-EIRENE simulations and comparison to experiment in ASDEX upgrade
    Brida, D.
    Lunt, T.
    Faitsch, M.
    Wischmeier, M.
    Feng, Y.
    Suttrop, W.
    Stroth, U.
    Eich, T.
    Kallenbach, A.
    Meyer, H.
    NUCLEAR MATERIALS AND ENERGY, 2019, 19 : 205 - 210
  • [46] Modeling of divertor power footprint widths on EAST by SOLPS5.0/B2.5-Eirene
    邓国忠
    刘晓菊
    王亮
    刘少承
    许吉禅
    冯威
    刘建斌
    刘欢
    高翔
    Plasma Science and Technology, 2017, 19 (04) : 32 - 37
  • [47] Study of detachment in future ASDEX Upgrade alternative divertor configurations by means of EMC3-EIRENE
    Lunt, T.
    Bernert, M.
    Brida, D.
    Cavedon, M.
    David, P.
    Faitsch, M.
    Feng, Y.
    Griener, M.
    Herrmann, A.
    Kurzan, B.
    Pan, O.
    Plank, U.
    Silvagni, D.
    Teschke, M.
    Willensdorfer, M.
    Wischmeier, M.
    Wolfrum, E.
    Zammuto, I
    NUCLEAR MATERIALS AND ENERGY, 2021, 26
  • [48] Study of detachment in future ASDEX Upgrade alternative divertor configurations by means of EMC3-EIRENE
    Lunt, T.
    Bernert, M.
    Brida, D.
    Cavedon, M.
    David, P.
    Faitsch, M.
    Feng, Y.
    Griener, M.
    Herrmann, A.
    Kurzan, B.
    Pan, O.
    Plank, U.
    Silvagni, D.
    Teschke, M.
    Willensdorfer, M.
    Wischmeier, M.
    Wolfrum, E.
    Zammuto, I.
    Nuclear Materials and Energy, 2021, 26
  • [49] 3D modeling of the ASDEX Upgrade edge plasma exposed to a localized tungsten source by means of EMC3-Eirene
    Lunt, T.
    Feng, Y.
    Krieger, K.
    Kallenbach, A.
    Neu, R.
    Janzer, A.
    Dux, R.
    Coster, D. P.
    Wischmeier, M.
    Hicks, N.
    Suttrop, W.
    Puetterich, T.
    Mueller, H. W.
    Rohde, V.
    Wolfrum, E.
    Fischer, R.
    JOURNAL OF NUCLEAR MATERIALS, 2011, 415 (01) : S505 - S508
  • [50] Modeling the toroidal asymmetry of the heat load impacted by nitrogen injection in EAST using EMC3-EIRENE
    Luo, Yang
    Liu, Haifeng
    Xu, Yuhong
    Feng, Yuhe
    Guo, Wenfeng
    Dong, Chunfeng
    Wang, Xianqu
    Huang, Jie
    Liu, Hai
    Zhang, Xin
    Li, Wei
    Yang, Lang
    Li, Yangbo
    Liu, Jinmao
    Cheng, Jun
    Tang, Changjian
    PLASMA PHYSICS AND CONTROLLED FUSION, 2021, 63 (10)