Thermoplastic tape placement - Challenging the autoclave process

被引：0
|
作者：
Schledjewski, Ralf [1 ]
机构：
[1] Inst Verbundwerkstoffe GmbH, Kaiserslautern, Germany
来源：
1ST EUCOMAS | 2008年 / 2028卷
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Thermoplastic tape placement is a discontinuous process. Fully impregnated fiber reinforced thermoplastic tapes are laid onto a mold to build up curved or flat structures sequentially. Each tape is melted by a heat source, welded to the layer below, compressed by e.g. a roller, and cooled down below melting temperature. If this is done properly, an in situ consolidation can be achieved, which means no additional consolidation process is needed.
引用
收藏
页码：245 / 251
页数：7
相关论文
共 50 条
  • [31] Anisogrid thermoplastic composite lattice structure by innovative out-of-autoclave process
    Daniele Santoro
    Denise Bellisario
    Fabrizio Quadrini
    Loredana Santo
    The International Journal of Advanced Manufacturing Technology, 2020, 109 : 1941 - 1952
  • [32] Removable tape using thermoplastic adhesive for QFN assembly process
    Kawai, T
    Nagoya, T
    Matsuura, H
    TWENTY SEVENTH ANNUAL IEEE/CPMT/SEMI INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM, 2002, : 190 - 192
  • [33] Simulation of the Tape-Laying Process for Thermoplastic Matrix Composites
    Narnhofer, M.
    Schledjewski, R.
    Mitschang, P.
    Perko, L.
    ADVANCES IN POLYMER TECHNOLOGY, 2013, 32 : E705 - E713
  • [34] BOWIE AND DICK AUTOCLAVE TAPE TEST
    BOWIE, JH
    KELSEY, JC
    THOMPSON, GR
    LANCET, 1963, 1 (728): : 586 - &
  • [35] A combined optical-thermal model for near-infrared laser heating of thermoplastic composites in an automated tape placement process
    Stokes-Griffin, C. M.
    Compston, P.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 75 : 104 - 115
  • [36] Study on the process of hot gas-assisted GF/PA5X thermoplastic composites automated tape placement
    Liu, Hao
    Li, Yong
    Huan, Da-Jun
    Zhu, Kang
    Guo, Da
    POLYMER COMPOSITES, 2024, 45 (17) : 16021 - 16032
  • [37] An Improvement in Thermal Modelling of Automated Tape Placement Process
    Barasinski, Anais
    Leygue, Adrien
    Soccard, Eric
    Poitou, Arnaud
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 185 - +
  • [38] ABOUT THE MODELING OF THE LASER ASSISTED TAPE PLACEMENT PROCESS
    Dedieu, C.
    Chinesta, F.
    Barasinski, A.
    Leygue, A.
    Dupillier, J-M
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [39] BOWIE AND DICK AUTOCLAVE TAPE TEST
    BOWIE, JH
    THOMPSON, GR
    KELSEY, JC
    LANCET, 1963, 1 (729): : 1215 - &
  • [40] Autoclave forming of thermoplastic composite parts
    Fernández, I
    Blas, F
    Frövel, A
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 : 266 - 269
12345