Error analysis of testing system of ballistic parameters based on linear CCD

被引:0
|
作者
Song, WD [1 ]
Zhao, QL [1 ]
Zhi, JZ [1 ]
机构
[1] Shijiazhuang Mech Engn Coll, Shijiazhuang 050003, Hebei, Peoples R China
关键词
CCD; error; angle of yaw; velocity; bullet;
D O I
暂无
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
formulas of calculating angle of yaw and velocity are shown in this paper Through analysis of the formulas in detail, it concluded that if bullet's length and diameter of bullet is much longer, measuring error of angle of yaw is small. Experiments of simulated bullet flying under zero angle of yaw and under 10-degree angle of yaw are done to prove this relation. Data of angle of yaw, velocity and their measuring error is shown in chart. Influence factor of accuracy of measuring ballistic parameters is presented It includes magnification influence, light source influence, center distance of pixel influence, and data rate of CCD influence, velocity influence on angle of yaw, and angle of yaw influence on velocity. Every factor is analyzed in detail and methods are given to reduce the influence. So in different occasions, how to improve accuracy of measuring ballistic parameters is learned.
引用
收藏
页码:7074 / 7076
页数:3
相关论文
共 50 条
  • [41] Testing system of CCD-based measuring optical property of chromatic display
    Yu, TH
    Dai, JM
    Liu, Y
    Jia, LJ
    PROCEEDINGS OF THE THIRD INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY, VOL 2, 2004, : 1358 - 1361
  • [42] Linear system parameters identification based on ant system algorithm
    Wang, L
    Wu, QD
    PROCEEDINGS OF THE 2001 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS (CCA'01), 2001, : 401 - 406
  • [43] The glass defect on-line test system based on DSP and linear CCD
    Shi, HJ
    Chen, SY
    Wang, ZB
    Chang, H
    ISTM/2005: 6th International Symposium on Test and Measurement, Vols 1-9, Conference Proceedings, 2005, : 6619 - 6622
  • [44] Two-dimensional bar codes recognition system based on the linear CCD
    Liang, FM
    ISTM/2003: 5TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-6, CONFERENCE PROCEEDINGS, 2003, : 1998 - 2001
  • [45] High Speed Data Acquisition System Based on ARM & Linear-CCD
    Dong Jianjun
    Zhao Xiaojin
    ISTM/2009: 8TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-6, 2009, : 3115 - 3118
  • [46] Error analysis and processing of partial compensatory aspheric testing system
    State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou 310027, China
    Zhejiang Daxue Xuebao (Gongxue Ban), 2012, 4 (636-642+733):
  • [47] ERROR ANALYSIS OF AN ALGORITHM FOR SOLVING AN UNDERDETERMINED LINEAR-SYSTEM
    ARIOLI, M
    LARATTA, A
    NUMERISCHE MATHEMATIK, 1985, 46 (02) : 255 - 268
  • [48] Refraction error analysis in stereo vision for system parameters optimization
    Tong, Zixiang
    Gu, Liuning
    Shao, Xinxing
    MEASUREMENT, 2023, 222
  • [49] Error sources analysis of the control system of a rocket and parameters' optimization
    Meng, XY
    ISTM/2001: 4TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1 AND 2, CONFERENCE PROCEEDINGS, 2001, : 1297 - 1300
  • [50] Calibration method for the structure parameters of a single linear array CCD-based photoelectric detection system using a matrix inversion transformation
    Dong, Tao
    Yang, Jiuqi
    Chen, Ding
    Chen, Dachuan
    OPTIK, 2018, 171 : 446 - 452