Design and Development of a Conductive Polymer Based 3D-Printed Tactile Sensor with Square Type Spring Structure

被引：0
|
作者：
Sampath, W. H. P. [1 ]
De Silva, A. H. T. E. [1 ]
Roshan, T. A. U. [1 ]
Amarasinghe, Y. W. R. [1 ]
机构：
[1] Univ Moratuwa, Dept Mech Engn, Katubedda 10400, Sri Lanka
来源：
ICAROB 2018: PROCEEDINGS OF THE 2018 INTERNATIONAL CONFERENCE ON ARTIFICIAL LIFE AND ROBOTICS | 2018年
关键词：
Square type spring structures; Conductive Polymers; 3D Printing;
D O I：
暂无
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
In this research, a novel tactile sensor (with 50mmx50mmx56mm dimensions) has been developed using a silicone rubber based conductive polymer sensing element array incorporated to a novel 3D printed square type spring structure. Initial characterisation has been completed for the sensor. The structure stated in this paper has been designed for force scaling purpose and it's numerically analysed prior to the fabrication to avoid any mechanical failures and ABS Plus and Polylactic acid were used in the 3D printing fabrication.
引用
收藏
页码：562 / 565
页数：4
相关论文
共 50 条
  • [31] Design, development and testing of 3D-printed conformal energy absorbing structures
    Schroeder, Silvio
    Grimm, Christian D.
    Witte, Lars
    Dimassi, Adli
    Buchholz, Philip
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [32] Design, Development, and Evaluation of a 3D-Printed Buccal Myomucosal Flap Simulator
    Cin, Mitchell D.
    Nourmohammadi, Zahra
    Hamdan, Usama
    Zopf, David A.
    CLEFT PALATE CRANIOFACIAL JOURNAL, 2025,
  • [33] Development of 3D-printed subcutaneous implants using concentrated polymer/drug solutions
    Picco, Camila J.
    Utomo, Emilia
    McClean, Andrea
    Dominguez-Robles, Juan
    Anjani, Qonita Kurnia
    Volpe-Zanutto, Fabiana
    McKenna, Peter E.
    Acheson, Jonathan G.
    Malinova, Dessislava
    Donnelly, Ryan F.
    Larraneta, Eneko
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2023, 631
  • [34] Development of 3D-printed polymer-zeolite composite monoliths for gas separation
    Thakkar, Harshul
    Lawson, Shane
    Rownaghi, Ali A.
    Rezaei, Fateme
    CHEMICAL ENGINEERING JOURNAL, 2018, 348 : 109 - 116
  • [35] Linearisation of a 3D printed flexible tactile sensor based on piezoresistive sensing
    Schouten, Martijn
    Prakken, Bernard
    Sanders, Remco
    Krijnen, Gijs
    2019 IEEE SENSORS, 2019,
  • [36] Energy Harvesting Using Optimized ZnO Polymer Nanocomposite-Based 3D-Printed Lattice Structure
    Maurya, Muni Raj
    Alhamdi, Mazen
    Al-Darwish, Fawziya
    Sadek, Faisal
    Douglas, Yousef
    Karabili, Nawar
    Eltayeb, Allaa
    Bagherzadeh, Roohollah
    Zaidi, Shabi Abbas
    Sadasivuni, Kishor Kumar
    POLYMERS, 2024, 16 (21)
  • [37] Design and development of fused deposition modeling (FDM) 3D-Printed Orthotic Insole by using gyroid structure
    Jonnala, Uday Kumar
    Sankineni, Rakesh
    Kumar, Y. Ravi
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2023, 145
  • [38] Antenna Array Based on 3D-printed Plastic BoR Elements Coated with Conductive Paint
    Kuosmanen, Matti
    Ala-Laurinaho, Juha
    Holopainen, Jari
    Viikari, Ville
    2023 17TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION, EUCAP, 2023,
  • [39] Thermally Conductive 3D-Printed Carbon-Nanotube-Filled Polymer Nanocomposites for Scalable Thermal Management
    Zhang, Chunyan
    Deng, Kaiyue
    Li, Xiazhang
    Fu, Kun Kelvin
    Ni, Chaoying
    ACS APPLIED NANO MATERIALS, 2023, 6 (14) : 13400 - 13408
  • [40] Design and evaluation of 3D-printed auxetic structures coated by CWPU/graphene as strain sensor
    Choi, Hyeong Yeol
    Shin, Eun Joo
    Lee, Sun Hee
    SCIENTIFIC REPORTS, 2022, 12 (01)
12345