THE INFLUENCE OF Q&P PARAMETERS ON CARBIDE PRECIPITATION AND MECHANICAL PROPERTIES OF HIGH-CR MARTENSITIC STEEL

被引：0
|
作者：
Bagrowska, Magdalena [1 ]
Golaszewski, Adam [1 ]
Swiatnicki, Wieslaw [1 ]
机构：
[1] Warsaw Univ Technol, Fac Mat Sci & Engn, Warsaw, Poland
来源：
28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019) | 2019年
关键词：
Martensitic stainless steel; carbide precipitations; Q&P processing; retained austenite;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Quenching and Partitioning method of steel heat treatment (Q&P) [1-4] consists of two steps: partial martensitic quenching (Q) followed by short annealing i.e. partitioning step (P). During partitioning carbon atoms diffuse from supersaturated martensite laths or plates into surrounding untransformed austenite. This process leads to the stabilisation of retained austenite in steel after martensitic transformation. As a result, a two-phase microstructure is obtained. It consists of tempered martensite and stable retained austenite. The presence of stabilised austenite in steel improves the ductility of steel due to the TRIP effect (Transformation Induced Plasticity). The aim of this study was to design the parameters of Quenching and Partitioning (Q&P) process of X46Cr13 steel and to investigate the influence of the process parameters on the microstructure and on mechanical properties of this steel. The parameters of Q&P treatment were determined with the use of dilatometric measurements. To determine phase composition after Q&P process, magnetic measurements were conducted. The microstructure of martensite and austenite as well as the presence of carbides were examined through Transmission Electron Microscopy (TEM). Changes in hardness after various variants of Q&P treatment were also analysed.
引用
收藏
页码：544 / 549
页数：6
相关论文
共 50 条
  • [31] Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel
    Seo, Eun Jung
    Cho, Lawrence
    Estrin, Yuri
    De Cooman, Bruno C.
    ACTA MATERIALIA, 2016, 113 : 124 - 139
  • [32] Influence of the Cooling Rate on the Microstructure and Mechanical Properties in 5% Cr Martensitic Steel
    Einfluss der Abkühlrate auf die Mikrostruktur und die mechanischen Eigenschaften in 5% Cr martensitischem Stahl
    Ognianov, Miloslav (miloslav.ognianov@bohler-edelstahl.at), 1600, Springer (162):
  • [33] Microstructural and mechanical characterization of a silicon and molybdenum Q&P steel
    Pastore, E.
    Holovenko, O.
    De Negri, S.
    Ienco, M. G.
    Maccio, D.
    Pinasco, M. R.
    Saccone, A.
    De Sanctis, M.
    Valentini, R.
    METALLURGIA ITALIANA, 2012, (04): : 33 - 42
  • [34] Influence of Isothermal Treatment Prior to Initial Quenching of Q&P Process on Microstructure and Mechanical Properties of Medium Mn Steel
    Kim, Ji Hoon
    Kwon, Min-Hyeok
    Lee, Jae Sang
    Lee, Seawoong
    Lee, Kyooyoung
    Suh, Dong-Woo
    ISIJ INTERNATIONAL, 2021, 61 (02) : 518 - 526
  • [35] Study of Quenching and Partitioning (Q&P) and Ultrasonic Surface Rolling (USR) Process on Microstructure and Mechanical Property of a High-Strength Martensitic Steel
    Hou, Yi
    Duan, Chenfeng
    Li, Xiaoqiang
    Qu, Shengguan
    MATERIALS, 2024, 17 (11)
  • [36] Carbon enrichment of austenite and carbide precipitation during the Quenching and Partitioning (Q&P) process
    Rizzo, F. C.
    Edmonds, D. V.
    He, K.
    Speer, J. G.
    Matlock, D. K.
    Clarke, A.
    SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS 2005, VOL 1, 2005, : 535 - 544
  • [37] The effects of Q&P on microstructures and mechanical properties of a 18CrNiMo7-6 steel
    Pan, Haijun
    Wang, Zheng
    Zhang, Jinsong
    Li, Jun
    Wei, Gang
    Qiao, Bo
    Liu, Lin
    Li, Jing
    Zhao, Yujie
    Wang, Zhijian
    Zhu, Wensheng
    Han, Dongxu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 861
  • [38] EFFECT OF ONE STEP Q&P PROCESS ON MICROSTURCTURE AND MECHANICAL PROPERTIES OF A DUAL MARTENSITE STEEL
    Li Xiaolin
    Wang Zhaodong
    ACTA METALLURGICA SINICA, 2015, 51 (05) : 537 - 544
  • [39] Microstructure and mechanical properties of partially ferritic Q&P steels
    Kickinger, Christoph
    Suppan, Clemens
    Hebesberger, Thomas
    Schnitzer, Ronald
    Hofer, Christina
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 815
  • [40] Kinetic Parameters of Secondary Carbide Precipitation in High-Cr White Iron Alloyed by Mn-Ni-Mo-V Complex
    V. G. Efremenko
    Yu. G. Chabak
    M. N. Brykov
    Journal of Materials Engineering and Performance, 2013, 22 : 1378 - 1385
12345