Research on Fatigue Properties of Typical Welded Joints of DH36 Steel at-60 °C

被引：10

作者：

Zhao, Weidong ^{[1
]}

Feng, Guoqing ^{[1
]}

Liu, Wenchao ^{[1
]}

Ren, Huilong ^{[1
]}

机构：

[1] Harbin Engn Univ, Dept Shipbldg Engn, Harbin 150001, Peoples R China

来源：

APPLIED SCIENCES-BASEL | 2020年 / 10卷 / 11期

基金：

中国国家自然科学基金;

关键词：

fatigue; low temperature; stress concentration factor; Vickers hardness; fractography; STRESS-CONCENTRATION FACTORS; HIGH-STRENGTH STEEL; HEAT-AFFECTED ZONE; MECHANICAL-PROPERTIES; CRACK NUCLEATION; LOW-TEMPERATURE; MICROSTRUCTURE; FRACTURE; PROPAGATION; BEHAVIOR;

D O I：

10.3390/app10113742

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

As the development of the polar region continues to increase, the fatigue properties of structures at low temperature are increasingly receiving researcher attention. This study aimed to investigate the fatigue properties of T-welded and cruciform welded joints at -60 degrees C. Logarithmic S-N curves based on the hot-spot stress of the T-welded and cruciform welded joints at 50% and 95% confidence levels were obtained at -60 degrees C. The test results showed that the fatigue properties of T-welded joints were almost 2-7% better than those of the cruciform welded joints at -60 degrees C. Factors that affected the fatigue properties of welded joints, such as the stress concentration factor, microstructure, Vickers hardness profiles, and fractography, were also studied and the test results showed that the fatigue properties of cruciform welded joints at -60 degrees C were 57.215% better than at room temperature.

引用

页数：19

共 50 条

[31] Study on the fatigue properties of welded joints for 15MnVN steel
Chen, Jiaquan
Xie, Liyang
Xu, Hao
Jixie Qiangdu/Journal of Mechanical Strength, 1998, 20 (01): : 74 - 76
[32] Fatigue properties of laser welded dual-phase steel joints
Farabi, N.
Chen, D. L.
Zhou, Y.
FATIGUE 2010, 2010, 2 (01): : 835 - 843
[33] Fatigue properties of welded joints using steel with high resistance to fatigue crack growth
Nakashima K.
Shimanuki H.
Nose T.
Ishikawa T.
Welding International, 2010, 24 (05) : 343 - 349
[34] Fatigue crack propagation properties of welded joints at 300°C
Ohta, A
Suzuki, N
Maeda, Y
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2003, 125 (02): : 131 - 135
[35] Fatigue properties of welded joints using steel with high resistance to fatigue crack growth
Nakashima, Kiyotaka
Shimanuki, Hiroshi
Nose, Tetsuro
Ishikawa, Tadashi
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2009, 27 (01): : 28 - 33
[36] Fatigue analysis of typical welded joints of steel bridges using effective notch stress approach
Liao X.-W.
Wang Y.-Q.
Zong L.
Shi G.
Wang, Yuan-Qing (wang-yq@mail.tsinghua.edu.cn), 1600, Zhejiang University (51): : 1 - 8
[37] A mathematical model of mechanical properties influenced by manganese in DH36 high-strength ship plate steel
Wu J.-Z.
Shi X.
Guo H.-J.
Guo J.
Guo, Han-Jie (guohanjie@ustb.edu.cn), 1600, Science Press (38): : 101 - 108
[38] Influence of vibration stress relief (VSR) on the residual stress and microstructure in welded plate of DH36 low alloy high strength steel
Li, Shuqi
Fang, Hongyuan
Liu, Xuesong
ADVANCES IN MATERIALS AND MATERIALS PROCESSING IV, PTS 1 AND 2, 2014, 887-888 : 924 - 928
[39] A comparison between single sided and double sided friction stir welded 8mm thick DH36 steel plate
McPherson, N. A.
Galloway, A. M.
Cater, S. R.
Osman, M. M.
TRENDS IN WELDING RESEARCH: PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE, 2013, : 284 - 290
[40] Experimental study on fatigue properties of Q420C steel welded joints at room temperature
Yang, Liguo
Xing, Yongming
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2022, 19 (01)

← 1 2 3 4 5 →