Effect of welding variables on GTAW arc stagnation pressure

被引：8

作者：

Asquel, Gabriel de Simas ^{[1
]}

Storto Bittencourt, Ana Paula ^{[1
]}

da Cunha, Tiago Vieira ^{[1
]}

机构：

[1] Univ Fed Santa Catarina, Technol Ctr Joinville, Dona Franciscam 8300,Block U Zona Ind Norte, BR-89219600 Joinville, SC, Brazil

来源：

WELDING IN THE WORLD | 2020年 / 64卷 / 07期

关键词：

Stagnation pressure; Welding arc; Welding parameters; GTAW; POOL;

D O I：

10.1007/s40194-020-00919-x

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This paper presents the influence of welding current, electrode-workpiece distance, electrode composition, electrode diameter, electrode tip angle, shielding gas composition, and pulsed current frequency over the arc stagnation pressure of gas tungsten arc welding (GTAW). In this study, arc application tests were carried out over a 1-mm diameter hole on a non-melting water-cooled copper plate. The hole was connected to a differential pressure sensor through an extension tube. As a result, the welding arc pressure was observed to be directly proportional to the square of the welding current and to the tungsten electrode diameter. Moreover, the pressure increases as the electrode-workpiece distance is reduced, and it is inversely proportional to the electrode tip angle, for angles greater than 45 degrees. Also, the electrode composition, the pulsed current frequency, and the gas composition influence the welding arc stagnation pressure.

引用

页码：1149 / 1160

页数：12

共 50 条

[31] Predicting arc pressure in GTAW for a variety of process parameters using a coupled sheath and LTE arc model
M. Lohse
M. Trautmann
E. Siewert
M. Hertel
U. Füssel
Welding in the World, 2018, 62 : 629 - 635
[32] Numerical analysis of ultrasonic waves in the gas tungsten arc welding (GTAW) with ultrasonic excitation of current
Wang, Daqing
Hua, Chen
Lu, Hao
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 158
[33] Mechanism Analysis and Feature Extraction of Arc Sound Channel for Pulse GTAW Welding Dynamic Process
Lv, Na
Xu, Yan-ling
Fang, Gu
Zhao, Hui
Chen, Shan-ben
ROBOTIC WELDING, INTELLIGENCE AND AUTOMATION, RWIA'2014, 2015, 363 : 249 - 261
[34] Investigation on the influence of various welding parameters on the arc thermal efficiency of the GTAW process by calorimetric method
Mohammad Bagher Nasiri
Masoud Behzadinejad
Hamidreza Latifi
Jukka Martikainen
Journal of Mechanical Science and Technology, 2014, 28 : 3255 - 3261
[35] Predicting arc pressure in GTAW for a variety of process parameters using a coupled sheath and LTE arc model
Lohse, M.
Trautmann, M.
Siewert, E.
Hertel, M.
Fuessel, U.
WELDING IN THE WORLD, 2018, 62 (03) : 629 - 635
[36] Microstructure and wear properties of multicomponent alloy cladding formed by gas tungsten arc welding (GTAW)
Chen, J. H.
Chen, P. N.
Lin, C. M.
Chang, C. M.
Chang, Y. Y.
Wu, W.
SURFACE & COATINGS TECHNOLOGY, 2009, 203 (20-21): : 3231 - 3234
[37] Starting and operating a GTAW arc
不详
WELDING JOURNAL, 2000, : 13 - 13
[38] Performing higher speeds with dynamic feeding gas tungsten arc welding (GTAW) for pipeline applications
Goncalves e Silva, Regis Henrique
dos Santos Paes, Luiz Eduardo
Marques, Cleber
Riffel, Kaue Correa
Schwedersky, Mateus Barancelli
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (01)
[39] Effect of hydrostatic pressure of medium on stability of arc burning in underwater welding (review)
Gretskij, Yu.Ya.
Maksimov, S.Yu.
Avtomaticheskaya Svarka, 2003, (12): : 11 - 13
[40] Guided arc enhances GTAW
Zhang, YM
Lu, W
Liu, YC
WELDING JOURNAL, 2003, 82 (12) : 40 - 45

← 1 2 3 4 5 →