Ethanol-addition-enhanced, chemical vapor deposited tantalum oxide films from Ta(OC2H5)5 and oxygen precursors

被引:14
|
作者
Shinriki, H [1 ]
Sugiura, M
Liu, Y
Shimomura, K
Nakajima, T
机构
[1] Tokyo Electron Ltd, Cent Res Lab, Yamanashi 40701, Japan
[2] Tokyo Electron Tohoku Ltd, Yamanashi 40701, Japan
[3] Shinshu Univ, Fac Engn, Dept Chem & Mat Engn, Nagano 380, Japan
关键词
D O I
10.1149/1.1838793
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
An innovative chemical vapor deposition (CVD) technique of Ta2O5 film from Ta(OC2H5)(5) including ethanol and oxygen precursors is demonstrated in this paper. High deposition rate of approximately 10 nm/min is obtained by employing Ta(OC2H5)(5) including ethanol and oxygen precursors at 350 degrees C. Temperature-programmed decomposition analysis shows that decomposition of ethanol, adsorbed on the Ta2O5 film surface, into hydrogen and aldehyde begins at 250 degrees C. These results suggest that Ta2O5 film plays a role as a catalyst for dehydrogenation of ethanol. Under oxygen ambient, water seems to be easily generated on the Ta2O5 surface by reaction between the hydrogen and oxygen. Hydrolysis of ethoxide on the surface promotes deposition of Ta2O5 film. Carbon concentration included in the as-deposited Ta2O5 film can be remarkably reduced by the plasma oxygen annealing at 350 degrees C. Combination of the CVD at 350 degrees C and plasma-activated oxygen annealing at 350 degrees C provide favorable insulative properties for future dynamic random access memories and make it possible to form the film on the storage node while preventing oxidation of the storage node.
引用
收藏
页码:3247 / 3252
页数:6
相关论文
共 50 条
  • [31] Metalorganic chemical vapor deposition of nickel films from Ni(C5H5)2/H2
    Kang, JK
    Rhee, SW
    JOURNAL OF MATERIALS RESEARCH, 2000, 15 (08) : 1828 - 1833
  • [32] Electrical properties of Ta2O5 films obtained by plasma enhanced chemical vapor deposition using a TaF5 source
    Devine, RAB
    Vallier, L
    Autran, JL
    Paillet, P
    Leray, JL
    APPLIED PHYSICS LETTERS, 1996, 68 (13) : 1775 - 1777
  • [33] PREPARATION AND CHARACTERIZATION OF ZIRCONIUM-OXIDE COATINGS PREPARED FROM ZRCL2(OC2H5)2 BY THE SOL-GEL PROCESS
    YANG, L
    CHENG, JJ
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 1989, 112 (1-3) : 442 - 448
  • [34] Plasma-enhanced atomic layer deposition of SrTa2O6 thin films using Sr[Ta-OC2H5)5(OC2H4OCH3)]2 as precursor
    Shin, WC
    Ryu, SO
    You, IK
    Yu, BG
    Lee, WJ
    Choi, KJ
    Yoon, SG
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2004, 151 (05) : C292 - C296
  • [35] EFFECTS OF POSTDEPOSITION ANNEALING ON THE ELECTRICAL-PROPERTIES AND RELIABILITY OF ULTRATHIN CHEMICAL-VAPOR-DEPOSITED TA2O5 FILMS
    HAN, LK
    YOON, GW
    KWONG, DL
    MATHEWS, VK
    FAZAN, PC
    IEEE ELECTRON DEVICE LETTERS, 1994, 15 (08) : 280 - 282
  • [36] RELIABILITY CHARACTERISTICS OF METAL-OXIDE-SEMICONDUCTOR CAPACITORS WITH CHEMICAL VAPOR-DEPOSITED TA2O5 GATE DIELECTRICS
    LO, GQ
    KWONG, DL
    LEE, S
    APPLIED PHYSICS LETTERS, 1993, 62 (09) : 973 - 975
  • [37] Coatings of hybrid films prepared from CH3Si(OC2H5)3 and blocked isocyanate on stainless steel sheets
    Izumi, Keiji
    Iwamizu, Yoshiharu
    Shimizu, Takeshi
    Minami, Tsutomu
    Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 2000, 108 (1263): : 1016 - 1019
  • [38] TETRAETHOXYSILANE, SI(OC2H5)(4) - VAPOR-PRESSURE MEASUREMENTS AT TEMPERATURES FROM 323 TO 442 K BY MEANS OF A BOURDON SPOON GAUGE
    VANDERVIS, MGM
    CORDFUNKE, EHP
    THERMOCHIMICA ACTA, 1995, 265 : 129 - 134
  • [39] Coatings of hybrid films prepared from CH3Si(OC2H5)3 and blocked isocyanate on stainless steel sheets
    Izumi, K
    Iwamizu, Y
    Shimizu, T
    Minami, T
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2000, 108 (11) : 1016 - 1019
  • [40] Chemical Vapor Deposition of Tantalum Carbide from TaCl5-C3H6-Ar-H-2 System
    Kim, Daejong
    Jeong, Sang Min
    Yoon, Soon Gil
    Woo, Chang Hyun
    Kim, Joung Il
    Lee, Hyun-Geun
    Park, Ji Yeon
    Kim, Weon-Ju
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2016, 53 (06) : 597 - 603