Effects of power cycling test condition and test strategy on lifetime estimation of power modules in power electronic systems

被引：7
|
作者：
Choi, U. M. [1 ]
Lee, J. S. [2 ]
Blaabjerg, F. [3 ]
机构：
[1] Seoul Natl Univ Sci & Technol, Dept Elect & IT Media Engn, Seoul, South Korea
[2] Korea Railrd Res Inst, Uiwang, South Korea
[3] Aalborg Univ, Dept Energy Technol, Aalborg, Denmark
来源：
MICROELECTRONICS RELIABILITY | 2019年 / 100卷
基金：
新加坡国家研究基金会;
关键词：
RELIABILITY;
D O I：
10.1016/j.microrel.2019.113460
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
One of the main purposes of an accelerated power cycling test is to develop a lifetime model for the lifetime prediction of power modules. It is important to select proper test conditions when the power cycling test is performed since it is closely related to the lifetime model parameters and also to the testing time. In this paper, the effects of power cycling test condition and test strategy on the lifetime estimation of power modules are studied. The lifetime models of the IGBT module are developed by the accelerated power cycling tests with different test conditions and also by calibrated accelerated power cycling test. As a case study, the lifetime of IGBT module in motor drive system is estimated with different lifetime models and the results are compared.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Impact of Test Control Strategy on Power Cycling Lifetime
    Schuler, S.
    Scheuermann, U.
    INTERNATIONAL EXHIBITION AND CONFERENCE FOR POWER ELECTRONICS, INTELLIGENT MOTION AND POWER QUALITY 2010 (PCIM EUROPE 2010), VOLS 1 AND 2, 2010, : 331 - 336
  • [2] Lifetime estimation for IGBT modules in power converter under power fluctuation condition
    School of Reliability and Systems Engineering, Beihang University, Beijing, China
    Saf. Reliab. – Theory Appl. - Proc. Eur. Saf. Reliab. Conf., (3223-3230):
  • [3] Power Cycling Test Bench for IGBT Power Modules used in Wind Applications
    Wagenitz, Dennis
    Westerholz, Andre
    Erdmann, Eike
    Hambrecht, Andreas
    Dieckerhoff, Sibylle
    PROCEEDINGS OF THE 2011-14TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE 2011), 2011,
  • [4] Advanced Accelerated Power Cycling Test for Reliability Investigation of Power Device Modules
    Choi, Ui-Min
    Jorgensen, Soren
    Blaabjerg, Frede
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2016, 31 (12) : 8371 - 8386
  • [5] Influence of Power Cycling Test Methodology on the Applicability of the Linear Damage Accumulation Rule for the Lifetime Estimation in Power Devices
    Vaccaro, Alessandro
    Magnone, Paolo
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2023, 38 (05) : 6545 - 6554
  • [6] Fast power cycling test for IGBT modules in traction application
    Held, M
    Jacob, P
    Nicoletti, G
    Scacco, P
    Poech, MH
    1997 INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND DRIVE SYSTEMS, PROCEEDINGS, VOLS 1 AND 2, 1997, : 425 - 430
  • [7] Study on the lifetime characteristics of power modules under power cycling conditions
    Lai, Wei
    Chen, Minyou
    Ran, Li
    Xu, Shengyou
    Qin, Han
    Alatise, Olayiwola
    Mawby, Phil A.
    IET POWER ELECTRONICS, 2016, 9 (05) : 1045 - 1052
  • [8] Influence of Thermal Coupling on Lifetime Under Power Cycling Test
    Zhao, Yushan
    Deng, Erping
    Pan, Maoyang
    Zhang, Yiming
    Huang, Yongzhang
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2022, 37 (11) : 13641 - 13651
  • [9] Power Cycling Test Methods for Reliability Assessment of Power Device Modules in Respect to Temperature Stress
    Choi, Ui-Min
    Blaabjerg, Frede
    Jorgensen, Soren
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2018, 33 (03) : 2531 - 2551
  • [10] Analysis of the Performance of Different Packaging Technologies of SiC Power Modules during Power Cycling Test
    Singh, Bhanu Pratap
    Choudhury, Khaled Redwan
    Norrga, Staffan
    Kostov, Konstantin
    Nee, Hans-Peter
    2023 29TH INTERNATIONAL WORKSHOP ON THERMAL INVESTIGATIONS OF ICS AND SYSTEMS, THERMINIC, 2023,
12345