Process Development of Transflective Hybrid Device with Integrating Reflective LCD and In-cell OLED

被引：0

作者：

Chiu, Tien-Lung ^{[1
]}

Lin, Chi-Feng ^{[1
]}

Chen, Kuan-Yu ^{[1
]}

Lin, Hoang-Yan ^{[1
]}

Lee, Jiun-Haw ^{[1
]}

机构：

[1] Natl Taiwan Univ, Grad Inst Photon & Optoelect, Taipei 10617, Taiwan

来源：

EURODISPLAY 2009 | 2009年

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, fabrication and integration issues of a hybrid transflective device consisting of a reflective LCD and an OLED were addressed and solved. Thickness of this hybrid device was typically two glass substrate, which was the same as a usual LCD, with OLED fabricated on the inner side of the glass substrate. With suitable design of the process flow, electrical and optical characteristics of the OLED were not affected by the following LCD processes. Storage lifetime of this hybrid device was even longer than that of the control one because of the passivation effect of the LC materials.

引用

页码：568 / 568

页数：1

共 29 条

[21] Development of a micelle-fractional precipitation hybrid process for the pre-purification of paclitaxel from plant cell cultures
Han, Min-Gyeong
Jeon, Keum-Young
Mun, Sungyong
Kim, Jin-Hyun
PROCESS BIOCHEMISTRY, 2010, 45 (08) : 1368 - 1374
[22] Model Transferability and Reduced Experimental Burden in Cell Culture Process Development Facilitated by Hybrid Modeling and Intensified Design of Experiments
Bayer, Benjamin
Duerkop, Mark
Striedner, Gerald
Sissolak, Bernhard
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY, 2021, 9
[23] Model Transferability and Reduced Experimental Burden in Cell Culture Process Development Facilitated by Hybrid Modeling and Intensified Design of Experiments
Bayer, Benjamin
Duerkop, Mark
Striedner, Gerald
Sissolak, Bernhard
Frontiers in Bioengineering and Biotechnology, 2021, 9
[24] Synthesis and characterization of CuO nanoparticles, DBSA doped PANI and PANI/DBSA/CuO hybrid composites for diode and solar cell device development
Ashokan, S.
Ponnuswamy, V.
Jayamurugan, P.
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 646 : 40 - 48
[25] Process development and exergy analysis of a novel hybrid fuel cell-absorption refrigeration system utilizing nanofluid as the absorbent liquid
Pourfayaz, Fathollah
Imani, Mohammad
Mehrpooya, Mehdi
Shirmohammadi, Reza
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2019, 97 : 31 - 41
[26] Process development and exergy cost sensitivity analysis of a hybrid molten carbonate fuel cell power plant and carbon dioxide capturing process (vol 364, pg 299, 2017)
Mehrpooya, Mehdi
Ansarinasab, Hojat
Sharifzadeh, Mohammad Mehdi Moftakhari
Rosen, Marc A.
JOURNAL OF POWER SOURCES, 2017, 368 : 107 - 107
[27] Development of a femtosecond near-infrared laser-based cutting device for cell-assembled extracellular matrix based tissue engineered vascular graft manufacturing process
Vitry, Julien
Handschin, Charles
Kawecki, Fabien
L'heureuxi, Nicolas
TISSUE ENGINEERING PART A, 2023, 29 (13-14)
[28] An innovative hybrid structure of solar PV-driven air separation unit, molten carbonate fuel cell, and absorption–compression refrigeration system (Process development and exergy analysis)
Ghorbani, Bahram
Rahnavard, Zahra
Ahmadi, Mohammad Hossein
Jouybari, Alireza Khatami
Energy Reports, 2021, 7 : 8960 - 8972
[29] An innovative hybrid structure of solar PV-driven air separation unit, molten carbonate fuel cell, and absorption-compression refrigeration system (Process development and exergy analysis)
Ghorbani, Bahram
Rahnavard, Zahra
Ahmadi, Mohammad Hossein
Jouybari, Alireza Khatami
ENERGY REPORTS, 2021, 7 : 8960 - 8972

← 1 2 3 →