Effect of Al-5Ti-0.8C Master Alloy on Microstructure and Elevated Temperature Mechanical Properties of Al-Cu-Mn Alloy

被引：0
|
作者：
Zhang Guowei [1 ]
Niu Jingwei [1 ]
Xu Hong [1 ]
Jia Hongmin [2 ]
机构：
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
[2] Xian Shiyou Univ, Sch Mat Sci & Engn, Xian 710065, Peoples R China
来源：
RARE METAL MATERIALS AND ENGINEERING | 2021年 / 50卷 / 07期
关键词：
Al-5Ti-0.8C master alloy; Al-Cu-Mn alloy; grain refinement; precipitation strengthening; elevated temperature mechanical properties; GRAIN-SIZE; TI; REFINEMENT; PARTICLES; STABILITY; KINETICS; BEHAVIOR; LA;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new kind of Al-5Ti-0.8C master alloy was fabricated using a self-propagating combustion reaction method and dilution treatment, and the effects of different Al-5Ti-0.8C master alloy contents (0wt%, 0.1wt%, 0.3wt%, 0.5wt%) on the microstructure and elevated temperature mechanical properties of Al-Cu-Mn alloy were investigated. The results show that the Al-5Ti-0.8C master alloy refines the Al-Cu-Mn alloy, increases the amount of theta'(Al2Cu) precipitates, and reduces their size during heat treatment, resulting in the grain refinement. Moreover, this new master alloy obviously improves the elevated temperature mechanical properties of Al-Cu-n alloy, mainly due to the precipitation strengthening caused by the uniform distribution of second phases and fine theta'(Al2Cu) precipitates, and the formation of Al-3(Ti, Zr) nanoparticles with high thermal stability. Furthermore, the microstructure and mechanical properties of Al-Cu-Mn alloy with 0.3wt% A1-5Ti-0.8C master alloy show the optimal status.
引用
收藏
页码：2321 / 2328
页数：8
相关论文
共 50 条
  • [41] Effect of Ce addition on microstructure of Al20Cu2Mn3 twin phase in an Al-Cu-Mn casting alloy
    Chen, Zhongwei
    Chen, Pei
    Li, Shishun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 532 : 606 - 609
  • [42] Preparation of Al3Ti-Al2O3/Al Inoculant and Its Inoculation Effect on Al-Cu-Mn Alloy
    Ding, Jinhua
    Wang, Chao
    Lu, Cheng
    Zhu, Guangming
    Guo, Nana
    Gao, Xujie
    Wang, Xin
    Cui, Chunxiang
    MATERIALS, 2023, 16 (15)
  • [43] 新型Al-5Ti-0.8C中间合金对Al-Cu-Mn合金组织形貌和高温力学性能的影响（英文）
    张国伟
    牛经纬
    徐宏
    贾红敏
    稀有金属材料与工程, 2021, 50 (07) : 2321 - 2328
  • [44] Effect of Y on microstructure, damping properties and mechanical properties of Cu-Al-Ni-Mn alloy
    Yang, Liu
    Jiang, Xiaosong
    Sun, Hongliang
    Shao, Zhenyi
    Fang, Yongjian
    Shu, Rui
    MATERIALS LETTERS, 2022, 308
  • [45] The effect of Ti alloying on the mechanical properties and microstructure of a Zn-Al-Cu-Mg alloy
    Türk, Ahmet
    Durman, Mehmet
    Kayali, E. Sabri
    International Journal of Materials Research, 2022, 94 (08) : 892 - 896
  • [46] The effect of Ti alloying on the mechanical properties and microstructure of a Zn-Al-Cu-Mg alloy
    Türk, A
    Durman, M
    Kayali, ES
    ZEITSCHRIFT FUR METALLKUNDE, 2003, 94 (08): : 892 - 896
  • [47] The effect of Ti alloying on the mechanical properties and microstructure of a Zn-Al-Cu-Mg alloy
    Türk, Ahmet
    Durman, Mehmet
    Kayali, E. Sabri
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 2003, 94 (08): : 892 - 896
  • [48] Effects of stuff addition temperature on microstructure of Al-Ti-C master alloy
    School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China
    Tezhong Zhuzao Ji Youse Hejin, 2007, 7 (557-559):
  • [49] Effect of Micro-scale Y Addition on the Fracture Properties of Al-Cu-Mn Alloy
    Guo, Ting-Biao
    Zhang, Feng
    Ding, Wan-Wu
    Jia, Zhi
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2018, 31 (01)
  • [50] Effect of rare earth Y and Al-Ti-B master alloy on the microstructure and mechanical properties of 6063 aluminum alloy
    Ding, Wanwu
    Zhao, Xiaoyan
    Chen, Taili
    Zhang, Haixia
    Liu, Xiaoxiong
    Cheng, Yan
    Lei, Dongkai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 830
12345