Structural and adhesion properties of poly(ethyl 2-cyanoacrylate) post-cured at different temperatures and times

被引：4

作者：

Estan-Cerezo, Gabriel ^{[1
,2
,3
]}

Alonso, Diego A. ^{[2
,3
]}

Miguel Martin-Martinez, Jose ^{[1
]}

机构：

[1] Univ Alicante, Adhes & Adhes Lab, E-03080 Alicante, Spain

[2] Univ Alicante, Organ Chem Dept, Alicante, Spain

[3] Univ Alicante, Inst Organ Synth, Alicante, Spain

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2019年 / 33卷 / 04期

关键词：

Poly(ethylcyanoacrylate); thermal post-cure; adhesion; unzipping mechanism; DSC; TGA; CYANOACRYLATE; POLYMERIZATION; DEGRADATION; ETHYL;

D O I：

10.1080/01694243.2018.1509502

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The structure and properties of poly(ethyl 2-cyanoacrylate)s (pECNs) cured at 25 degrees C during 24hours, and post-cured at different temperatures (45-90 degrees C) and times (2-6hours) were studied. Irrespective of the post-cure conditions, pECN was not fully polymerized and two different structures of different molecular weights and topographies were obtained. The post-cure decreased the shear strength values in joints made with aluminum and ethyl cyanoacrylate due to the decrease in the percentage of higher molecular weight polymeric chains and the formation of new short polymeric chains by unzipping de-polymerization mechanism, both contributed to decrease the mechanical properties. On the other hand, the post-cure changed the morphology of pECN because of nano-spheres were produced by curing at 25 degrees C which were not present after post-cure at 90 degrees C.

引用

页码：329 / 345

页数：17

共 50 条

[41] Structural and Optical Properties of White Light Emitting ZnS:Mn2+ Nanoparticles at Different Synthesis Temperatures
K. R. Bindu
E. I. Anila
Journal of Fluorescence, 2015, 25 : 795 - 801
[42] Structural, morphological, dielectric, and magnetic properties of CoFe2O4 ceramics at different sintering temperatures
Thakur, Priyanka
Kishore, Kamal
Kumar, Rajesh
Pathak, Dinesh
Nassar, Kais Iben
Lal, Madan
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2024, 35 (29)
[43] Structural, optical and electrical properties of CuBiS2 thin films deposited by spray pyrolysis at different deposition times
Mansour A.M.
El Radaf I.M.
International Journal of Microstructure and Materials Properties, 2019, 14 (05) : 419 - 431
[44] Structural, Morphological and Optical Properties of Nanostructured ZrO2 Films Obtained by an Electrochemical Process at Different Deposition Temperatures
Lovchinov, Konstantin
Gergova, Rositsa
Alexieva, Gergana
COATINGS, 2022, 12 (07)
[45] Variation of the structural and optical properties of sol-gel TiO2 thin films with different treatment temperatures
Mechiakh, Raouf
Bensaha, Rabah
COMPTES RENDUS PHYSIQUE, 2006, 7 (3-4) : 464 - 470
[46] Structural and magnetic properties of epitaxial Co2FeAl films grown on MgO substrates for different growth temperatures
Chun, Byong Sun
Kim, Kyung-Ho
Leibing, Niklas
Serrano-Guisan, Santiago
Schumacher, Hans-Werner
Abid, Mohamed
Chu, In Chang
Mryasov, Oleg N.
Kim, Do Kyun
Wu, Han-Chun
Hwang, Chanyong
Kim, Young Keun
ACTA MATERIALIA, 2012, 60 (19) : 6714 - 6719
[47] Synthesis of Nickel-Doped TiO2 Thin Films and Their Structural and Optical Properties at Different Annealing Temperatures
Hojabri, A.
Adavi, M.
Hajakbari, F.
ACTA PHYSICA POLONICA A, 2017, 131 (03) : 386 - 388
[48] The structural, optical properties, surface and electrical properties of vanadium pentoxide (V2O5) films produced at different substrate temperatures
Kose, Erol
Aydogu, Senem
OPTIK, 2022, 268
[49] Tailoring the thermoelectric properties of bulk ZnAlO with different aluminum concentrations (1, 1.5 and 2%) by post annealing in air at various temperatures
Alzaid, Meshal
PHYSICA B-CONDENSED MATTER, 2021, 603 (603)
[50] Structural and electrical properties of RuO2 thin films prepared by rf-magnetron sputtering and annealing at different temperatures
Reddy, Y. K. Vayunandana
Mergel, D.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2006, 17 (12) : 1029 - 1034

← 1 2 3 4 5 →