The effects of copper (Cu) or zinc (Zn) on fluidity of A357 alloy

被引：5
|
作者：
Mao, Guoling [1 ]
Liu, Dongyang [1 ]
Gao, Wenli [1 ]
Liu, Shanguang [2 ]
Zhong, Liwei [2 ]
机构：
[1] Hunan Univ, Coll Mat Sci & Engn, Changsha 410082, Peoples R China
[2] Beijing Inst Aeronaut Mat, Beijing 100097, Peoples R China
来源：
MATERIALS LETTERS | 2021年 / 304卷
关键词：
A357; alloy; Fluidity; Cu; Zn; Metals and alloys; Thermal analysis; AL; SC;
D O I：
10.1016/j.matlet.2021.130733
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Excellent fluidity is an essential condition for Al-Si-Mg alloy (like A357) to make large thin-walled and complex structure castings, but there is no research about the effects of Cu or Zn on the fluidity of Al-Si-Mg alloys. Under sand casting conditions, the effects of Cu or Zn on the fluidity of A357 were investigated through spiral fluidity resin sand molds, DSC, polarizing microscope and SEM. The results showed that with increase of Cu or Zn content, the solidification temperature range (T) of A357 alloy increased, and the fluidity decreased. With Cu or Zn addition, the grain size of A357 alloy increased, but the coarse grain is not the main reason for the fluidity to deteriorate.
引用
收藏
页数：3
相关论文
共 50 条
  • [31] Hot Processing Maps and Microstructural Characteristics of A357 Alloy
    Kang, Fuwei
    Wei, Shijie
    Zhang, Jimin
    Wang, Enhao
    Fan, Dezhi
    Wang, Shanshan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (11) : 7352 - 7360
  • [32] Effect of hydrogen content on impact property of A357 alloy
    Xu, Zhengbing
    He, Juan
    Zou, Yongzhi
    Wang, Lijun
    Zeng, Jianmin
    TRANSFERABILITY AND APPLICABILITY OF CURRENT MECHANICS APPROACHES, 2009, : 431 - 435
  • [33] Evaluation of the Effects of Rotary Degassing Process Variables on the Quality of A357 Aluminum Alloy Castings
    M. Mostafaei
    M. Ghobadi
    Ghasem Eisaabadi B.
    Muhammet Uludağ
    Murat Tiryakioğlu
    Metallurgical and Materials Transactions B, 2016, 47 : 3469 - 3475
  • [34] Effects of Al-Ti-B-RE Grain Refiner on Microstructure of A357 Alloy
    Zhang, Chuanzheng
    Bai, Yuelong
    Zhang, Zhifeng
    Li, Bao
    Chen, Chunsheng
    ADVANCES IN MATERIALS PROCESSING, 2018, : 847 - 853
  • [35] Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy
    Jiang, Wenming
    Fan, Zitian
    Dai, Yucheng
    Li, Chi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 597 : 237 - 244
  • [36] Evaluation of the Effects of Rotary Degassing Process Variables on the Quality of A357 Aluminum Alloy Castings
    Mostafaei, M.
    Ghobadi, M.
    Eisaabadi, Ghasem B.
    Uludag, Muhammet
    Tiryakioglu, Murat
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (06): : 3469 - 3475
  • [37] The Character of Melt of A357 Alloy and Its Influences on the Solidification Microstructures
    Zhang, Rong
    Zhang, Limin
    Yang, Zhihuai
    Liu, Lin
    PRICM 7, PTS 1-3, 2010, 654-656 : 1412 - +
  • [38] Preparation of A357 Alloy Slurry by Pulsed Magnetic Field Processing
    L. Zhang
    J. P. Yao
    H. Qiu
    Q. Zhou
    Metallurgical and Materials Transactions B, 2012, 43 : 598 - 602
  • [39] Coatings via Electrospark Deposition in A357 alloy: microstructure and defect
    Leo, P.
    Renna, G.
    METALLURGIA ITALIANA, 2019, 111 (09): : 22 - 31
  • [40] EFFECT OF ULTRASOUNDS DURING THE SOLIDIFICATION PROCESS OF THE A357 ALUMINUM ALLOY
    Forn, Antonio
    da Silva, Manel
    Teresa Baile, Ma
    Picas, Josep A.
    Fauria, Antoli
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII, 2013, 192-193 : 428 - +
12345