Reduced Order Model of a Multistage Bladed Rotor with Geometric Mistuning via Modal Analyses of Finite Element Sectors

被引：0

作者：

Bhartiya, Yasharth ^{[1
]}

Sinha, Alok ^{[1
]}

机构：

[1] Penn State Univ, Dept Mech & Nucl Engn, University Pk, PA 16802 USA

来源：

PROCEEDINGS OF THE ASME TURBO EXPO 2010, VOL 6, PTS A AND B | 2010年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An algorithm to generate a reduced order model of a multi-stage rotor in which each stage has a different number of blades has been developed. It is shown that a reduced order model can be developed on the basis of tuned modes of certain bladed disks which can be easily obtained via sector analyses. Further, it is shown that reduced order model can also be obtained when blades are geometrically mistuned. This algorithm is similar to the modified modal domain analysis, which has been recently developed for a single-stage bladed rotor with geometric mistuning. The validity of this algorithm is shown for the finite element model of a two-stage bladed rotor. In addition, the statistical distributions of peak maximum amplitudes and natural frequencies of a two-stage rotor are generated via Monte Carlo simulations for different patterns of geometric mistuning.

引用

页码：939 / 948

页数：10

共 50 条

[31] Increasing the buckling capacity with modal geometric "imperfections'' designed by a reduced order model
Magisano, Domenico
Garcea, Giovanni
THIN-WALLED STRUCTURES, 2022, 178
[32] Geometric Mistuning Reduced-Order Model Development Utilizing Bayesian Surrogate Models for Component Mode Calculations
Beck, Joseph A.
Brown, Jeffrey M.
Kaszynski, Alex A.
Carper, Emily B.
Gillaugh, Daniel L.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2019, 141 (10):
[33] A reduced order model for the finite element approximation of eigenvalue problems
Bertrand, Fleurianne
Boffi, Daniele
Halim, Abdul
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2023, 404
[34] A new finite element model for reduced order electromagnetic modeling
Zhu, Y
Cangellaris, AC
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2001, 11 (05) : 211 - 213
[35] Reduced-order nonlinear modal equations of plates based on the finite element method
Harada, A
Kobayashi, Y
Yamada, G
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2002, 45 (01) : 79 - 86
[36] FINITE-ELEMENT AND MODAL ANALYSES OF ROTOR-BEARING SYSTEMS UNDER STOCHASTIC LOADING CONDITIONS
HASHISH, E
SANKAR, TS
MECHANICAL ENGINEERING, 1983, 105 (11) : 109 - 109
[37] A Reduced-Order Meshless Energy Model for the Vibrations of Mistuned Bladed Disks-Part II: Finite Element Benchmark Comparisons
Fang, C.
McGee, O. G., III
El Aini, Y.
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2013, 135 (06):
[38] FINITE-ELEMENT AND MODAL ANALYSES OF ROTOR-BEARING SYSTEMS UNDER STOCHASTIC LOADING CONDITIONS
HASHISH, E
SANKAR, TS
JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME, 1984, 106 (01): : 80 - 89
[39] FINITE ELEMENT AND MODAL ANALYSES OF ROTOR-BEARING SYSTEMS UNDER STOCHASTIC LOADING CONDITIONS.
Hashish, E.
Sankar, T.S.
Journal of Vibration, Acoustics, Stress, and Reliability in Design, 1984, 106 (01): : 80 - 89
[40] Conventional and complex modal analyses of a finite element model of human head and neck
Tse, Kwong Ming
Bin Tan, Long
Lim, Siak Piang
Lee, Heow Pueh
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2015, 18 (09) : 961 - 973

← 1 2 3 4 5 →