A modified algebraic reconstruction algorithm for sparse projection

Background: Computed tomography (CT) is an advanced medical imaging technology. The images obtained by CT are helpful for improving diagnostic accuracy. Currently, CT is widely used in clinical settings for diagnosis and health examinations. However, full angle CT scanning has the disadvantage of causing radiation damage to the human body. Sparse angle projection CT scanning is the most effective way to minimize this damage, but the quality of the reconstructed image is reduced. Therefore, it is important to improve the reconstructed image quality produced by sparse angle projection. Methods: In this paper, we focused on the algebraic reconstruction algorithm. To reduce the accumulation of random noise, we formulated a modified algebraic reconstruction algorithm. Firstly, the algebraic reconstruction algorithm was used to compute two consecutive results, and then the weighted sum of these two results was used to correct the reconstructed image, and an iterative result was obtained. Using this method, we aimed to reduce the noise accumulation caused by iteration. Results: In this study, 20 angle projections were used for the reconstruction. The experimental object was the Shepp-Logan phantom test image. The experiments were implemented under two conditions: without noise and with noise. The peak signal to noise ratio (PSNR) and the mean squared error (MSE) of the reconstructed image from projections without noise were 76.0896 and 0.0016, respectively. The PSNR and MSE of the reconstructed image from projections with noise were 75.8263 and 0.0017, respectively. The reconstructed performance was superior to the previous algebraic reconstruction algorithm. Conclusions: The performance of the proposed method was superior to other algorithms, which confirms that noise accumulation caused by iteration can be effectively reduced by the weighted summation of two consecutive reconstruction results. Moreover, the reconstruction performance under noisy projection is superior to other algorithms, which demonstrates that the proposed method improves anti-noise performance.