Morphology, granulometric and structural phase composition of mechanically synthesized composite powder Al-Mg plus Al/MWCNTs

被引:2
|
作者
Aborkin, A. V. [1 ]
Sobol'kov, A. V. [1 ]
Kireev, A. V. [1 ]
Volochko, A. T. [2 ]
Izobello, A. Yu [2 ]
Sachkova, N. V. [3 ]
Sytschev, A. E.
机构
[1] Vladimir State Univ, Vladimir, Russia
[2] Natl Acad Sci Belarus, Phys Engn Inst, Minsk, BELARUS
[3] Russian Acad Sci, Merzhanov Inst Struct Macrokinet & Mat Sci, Chernogolovka, Russia
关键词
D O I
10.1088/1742-6596/951/1/012008
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
A method of mechanical synthesis in a planetary ball mill produced composite powders based on a nanocrystalline Al-Mg matrix reinforced with micro additives of Al / MWCNTs. The granulometric composition of the obtained composite powders was studied. It has been established that the concentration of Al / MWCNTs does not significantly affect the average particle size of the composite powder formed in the process of mechanical synthesis. The resulting composite powders were studied by X-ray diffraction analysis. The influence of the Al / MWCNTs concentration on the size of the coherent scattering regions of the synthesized powder is determined. The morphology of the resulting composite powders was studied by high-resolution scanning microscopy. The resulting powders can be used in the creation of bulk composite materials and functional coatings.
引用
收藏
页数:3
相关论文
共 50 条
  • [21] Morphology, structure, and phase composition of microplasma coatings formed on Al-Cu-Mg alloy
    Slonova, A. I.
    Terleeva, O. P.
    PROTECTION OF METALS, 2008, 44 (01): : 65 - 75
  • [22] Morphology, structure, and phase composition of microplasma coatings formed on Al-Cu-Mg alloy
    A. I. Sonova
    O. P. Terleeva
    Protection of Metals, 2008, 44 (1): : 65 - 75
  • [23] IN SITU FABRICATION OF Al 2024-Mg2Si COMPOSITE BY SPARK PLASMA SINTERING OF REACTIVE MECHANICALLY ALLOYED POWDER
    Sadeghian, Z.
    Dezfulizadeh, R.
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2016, 13 (02) : 10 - 19
  • [24] Effect and Mechanism of NH4H2PO4/Montmorillonite Composite Powder on Al-Mg Alloy Dust Explosion
    Chen, Guowei
    Xu, Kaili
    Liu, Bo
    Li, Jishuo
    Hao, Tengteng
    Yan, Ke
    COMBUSTION SCIENCE AND TECHNOLOGY, 2024,
  • [25] Inclusion Removal Process of Homogeneous CuCr50 Alloy In-Situ Synthesized by Al-Mg Composite Strengthening Reduction Coupling Slagging
    An, Wang
    Dou, Zhihe
    Zhang, Tingan
    Han, Jinru
    MATERIALS, 2024, 17 (14)
  • [26] Microstructure Evaluation and Wear Resistance Property of Al-Si-X/Al2O3 Composite by the Displacement Reaction in Al-Mg Alloy Melt using High Energy Mechanical Milled Al-SiO2-X Composite Powder
    Do Woo, Kee
    Kim, Dong Keon
    Lee, Hyun Bom
    Moon, Min Seok
    Ki, Woong
    Kwon, Eui Pyo
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2008, 18 (06): : 339 - 346
  • [27] Modification of Microstructure and Properties of Extruded Mg-Li-Al Alloys of α and α plus β Phase Composition using ECAP Processing
    Dutkiewicz, J.
    Rusz, S.
    Maziarz, W.
    Skuza, W.
    Kuc, D.
    Hilser, O.
    ACTA PHYSICA POLONICA A, 2017, 131 (05) : 1303 - 1306
  • [28] Structure, Phase Composition and Mechanical Properties of Al plus 7% Mg plus 3% Zn Casting Alloy with Iron and Beryllium Additives.
    Belov, N.A.
    Evseev, Yu.V.
    Zolotorevskii, V.S.
    1600,
  • [29] Phase Composition and Mechanical Properties of Cerium- and Yttrium-Containing Al-Mg Alloys Subjected to Heat Treatments under Various Conditions
    Rokhlin, L. L.
    Bochvar, N. R.
    Leonova, N. P.
    Lysova, E. V.
    RUSSIAN METALLURGY, 2007, (04): : 331 - 334
  • [30] Transient liquid phase bonding of Al/Mg2Si composite using a Cu-Ni mixed powder
    Baghbani, M. Ghayoor
    Hadian, A. M.
    ULTRAFINE GRAINED AND NANO-STRUCTURED MATERIALS IV, 2014, 829 : 632 - 637