Effect of pyrolytic carbon content on microstructure and tribological properties of C/C-SiC brake composites fabricated by isothermal chemical vapor infiltration

被引：26
|
作者：
Shi, Qilong [1 ]
Xiao, Peng [1 ]
机构：
[1] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源：
SOLID STATE SCIENCES | 2012年 / 14卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Ceramic-matrix composites; Friction/wear; Isothermal chemical vapor infiltration (ICVI); CARBIDE COMPOSITES; BEHAVIOR; MATRIX;
D O I：
10.1016/j.solidstatesciences.2011.10.010
中图分类号：
O61 [无机化学];
学科分类号：
070301 ; 081704 ;
摘要：
Four types of C/C-SiC composites were prepared by isothermal chemical vapor infiltration (ICVI) of SiC on C/C preforms of different densities. Tribological properties of the composites were evaluated by using MM-1000 testing machine. The results indicated that the friction behaviors of the composites are a strong function of the content of pyrolytic carbon (in matrix). Moreover, friction film was formed on the surface and increased with pyrolytic carbon content. Debris originated of particulate and film-type have been observed after friction testing with ratio and size determined by the content of pyrolytic carbon. (C) 2011 Elsevier Masson SAS. All rights reserved.
引用
收藏
页码：26 / 34
页数：9
相关论文
共 50 条
  • [21] Grinding effect of C/C-SiC composites prepared by Isothermal chemical Vapour infiltration during braking process
    Shi, Qilong
    Xiao, Peng
    Zheng, Feng
    Advances in Information Sciences and Service Sciences, 2012, 4 (03): : 192 - 200
  • [22] Microstructure and mechanical properties of C/C-SiC composites fabricated by a rapid processing method
    Wang, Jiping
    Lin, Min
    Xu, Zhuo
    Zhang, Yonghui
    Shi, Zhongqi
    Qian, Junmin
    Qiao, Guanjun
    Jin, Zhihao
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (14) : 3091 - 3097
  • [23] Effects of Temperature and Water Vapor Content on Microstructure, Mechanical Properties and Corrosion Behavior of C/C-SiC Composites
    Wei, Yanbin
    Ye, Zhiyong
    Wang, Yalei
    Xiong, Xiang
    Liu, Zaidong
    Wang, Jinming
    Li, Tongqi
    MATERIALS, 2024, 17 (24)
  • [24] Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction
    Zhuan Li
    International Journal of Minerals Metallurgy and Materials, 2010, 17 (04) : 500 - 505
  • [25] Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction
    Zhuan Li
    Peng Xiao
    Xiang Xiong
    International Journal of Minerals, Metallurgy, and Materials, 2010, 17 : 500 - 505
  • [26] Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction
    Li, Zhuan
    Xiao, Peng
    Xiong, Xiang
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2010, 17 (04) : 500 - 505
  • [27] Microstructure and Ablation Properties of the Pierced C/C-SiC Composites Prepared by Reactive Melt Infiltration
    Wu, Xiaojun
    Liu, Mingqing
    Zhang, Zhaofu
    Xie, Dong
    Guo, Chunyuan
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (11): : 4023 - 4030
  • [28] Microstructure and Ablation Properties of the Pierced C/C-SiC Composites Prepared by Reactive Melt Infiltration
    Wu Xiaojun
    Liu Mingqing
    Zhang Zhaofu
    Xie Dong
    Guo Chunyuan
    RARE METAL MATERIALS AND ENGINEERING, 2021, 50 (11) : 4023 - 4030
  • [29] The morphology and mechanism of formation of SiC in C/C-SiC composites fabricated by liquid silicon infiltration
    Peng, Xiao
    Zhuan, Li
    Zi-bing, Zhu
    Xiang, Xiong
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (03): : 335 - 340
  • [30] Effect of powdered h-BN as addition on the microstructure and mechanical properties of C/C composites fabricated by chemical vapor infiltration
    Xiao, Peng
    Li, Zhichao
    Pan, Ling
    Liu, Zeyan
    Zhang, Bengu
    Li, Zhuan
    Li, Yang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 743 : 707 - 715
12345