3D PRINTING OF SUPER CONCENTRATED ALGINATE CLAY INK WITH POTENTIAL APPLICATION IN REGENERATIVE MEDICINE

被引：0
|
作者：
Leu Alexa, Rebeca [1 ]
Iovu, Horia [1 ,2 ]
Nicolae, Madalina Cristina [1 ]
Mihaescu, Ionut Catalin [3 ]
Alexandrescu, Elvira [3 ]
Ianchis, Raluca [3 ]
机构：
[1] Univ Politehn Bucuresti, Dept Bioresources & Polymer Sci, Adv Polymer Mat Grp, Bucharest, Romania
[2] Acad Romanian Scientists, Bucharest, Romania
[3] Natl RD Inst Chem & Petrochem ICECHIM Bucharest, Bucharest, Romania
来源：
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE | 2021年 / 83卷 / 04期
关键词：
alginate; natural clay; 3D printing;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The central objective of this study was to obtain a 3D printable ink with possible application in regenerative medicine. On this line, we developed printable inks based on alginate in a concentration of 5% and ClositeNa (ClNa) in two concentration (18% and 20%.) All the ink formulations were characterized from the point of view of printability, then a roundness analyze was performed to quantify the printing fidelity. It could be observed that with the increase of the clay concentration, the structural integrity of the scaffolds was enhanced. Also, all the materials were charaterized using FTIR, SEM, TGA and Nanoindentation analysis.
引用
收藏
页码：197 / 208
页数：12
相关论文
共 50 条
  • [31] 3D constructing: Exploring the potential of 3D concrete and clay printing with generative design for architectural innovation
    Madrid, Javier Alonso
    Ortega, Guillermo Sotorrio
    Olsson, Nils O. E.
    Rio, Jose Antonio Tenorio
    INFORMES DE LA CONSTRUCCION, 2024, 76 (574)
  • [32] 3D ink jet printing of ceramics and biomaterials
    Derby, B
    Digital Fabrication 2005, Final Program and Proceedings, 2005, : 177 - 177
  • [33] Formulation of a Ceramic Ink for 3D Inkjet Printing
    Graf, Dennis
    Jung, Judith
    Hanemann, Thomas
    MICROMACHINES, 2021, 12 (09)
  • [34] Application of Synthetic Hectorite Modified Clay in 3D Printing of Longquan Celadon
    Zeng Xianwei
    Jin Ying
    Wu Yixin
    Luo Jun
    Xu Chenyu
    Mao Weijie
    Zhang He
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 : 287 - 291
  • [35] Development of clay based novel bio-ink for 3D bio-printing process
    Habib, Md Ahasan
    Khoda, Bashir
    46TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 46, 2018, 26 : 846 - 856
  • [36] Development of a clay based bioink for 3D cell printing for skeletal application
    Ahlfeld, T.
    Cidonio, G.
    Kilian, D.
    Duin, S.
    Akkineni, A. R.
    Dawson, J. I.
    Yang, S.
    Lode, A.
    Oreffo, R. O. C.
    Gelinsky, M.
    BIOFABRICATION, 2017, 9 (03)
  • [37] Nondestructive frozen protein ink: Antifreeze mechanism, processability, and application in 3D printing
    Tian, Han
    Chen, Xu
    Wu, Jiajie
    Wu, Jinhong
    Huang, Jianlian
    Cai, Xixi
    Wang, Shaoyun
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2024, 277
  • [38] 3d Printing Of LEGO®-inspired Titanium Scaffold For Patient-specific Regenerative Medicine
    Lee, S. S.
    Du, X.
    Smit, T.
    Seiler, D.
    de Wild, M.
    Ferguson, S. J.
    TISSUE ENGINEERING PART A, 2022, 28 : 121 - 122
  • [39] 3D printing of liquid and soft materials: Applications from regenerative medicine to wearable sensing
    Hinton, T. J.
    Lee, Andrew
    Hudson, Andrew
    Abdollahi, Sara
    Feinberg, Adam
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 255
  • [40] 3D printed chitosan / hydroxyapatite scaffolds for potential use in regenerative medicine
    Chavanne, Philippe
    Stevanovic, Sabrina
    Wuthrich, Alain
    Braissant, Olivier
    Pieles, Uwe
    Gruner, Philipp
    Schumacher, Ralf
    BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 2013, 58
12345