Evaluation of Microstructure and Wear Properties of Ti-6Al-4V Alloy Plasma Carbonized at Different Temperatures

被引：5
|
作者：
Zhang Yong [1 ]
Wei Qiulan [2 ]
Xing Yazhe [1 ]
Jiang Chaoping [1 ]
Li Xinghang [1 ]
Zhao Zhiyu [1 ]
机构：
[1] Changan Univ, Sch Mat Sci & Engn, Xian 710064, Peoples R China
[2] Shaanxi Coll Commun Technol, Dept Automot Engn, Xian 710018, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2015年 / 30卷 / 03期
基金：
中国国家自然科学基金;
关键词：
Ti-6Al-4V; plasma carburizing; layer; wear resistance; DRY SLIDING WEAR; TITANIUM-ALLOYS; HYDROGEN; BEHAVIOR; FATIGUE; TIME;
D O I：
10.1007/s11595-015-1202-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti-6Al-4V (TC4) alloys were plasma carbonized at different temperatures (900, 950, and 1 000 degrees C) for duration of 3 h. Graphite rod was employed as carbon supplier to avoid the hydrogen brittleness which is ubiquitous in traditional gas carbonizing process. Two distinguished structures including a thin compound layer (carbides layer) and a thick layer with the mixed microstructure of TiC and the alpha-Ti in carburing layer were formed during carburizing. Furthermore, it was found that the microstructure and the properties of TC4 alloy were significantly related to the carbonizing temperature. The specimen plasma carbonized at 950 degrees C obtained maximum value both in the hardness and wear resistance.
引用
收藏
页码：631 / 638
页数：8
相关论文
共 50 条
  • [21] Hydrogen-induced wear of Ti-6Al-4V alloy
    Yuan, Baoguo
    Yu, Haiping
    Li, Ping
    Xu, Guihua
    Li, Chunfeng
    Xue, Kemin
    Sun, Dongli
    NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 566 - +
  • [22] Tool wear in cryogenic turning of Ti-6Al-4V alloy
    Venugopal, K. A.
    Paul, S.
    Chattopadhyay, A. B.
    CRYOGENICS, 2007, 47 (01) : 12 - 18
  • [23] MECHANICAL-PROPERTIES OF CAST TI-6AL-4V ALLOY WITH IMPROVED MICROSTRUCTURE
    IBARAKI, Y
    SASAKI, T
    HONMA, H
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1980, 44 (03) : 311 - 316
  • [24] Microstructure and mechanical properties of a friction stir processed Ti-6Al-4V alloy
    Su, Jianqing
    Wang, Jiye
    Mishra, Rajiv S.
    Xu, Ray
    Baumann, John A.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 573 : 67 - 74
  • [25] Microstructure-Tensile Properties Correlation for the Ti-6Al-4V Titanium Alloy
    Shi, Xiaohui
    Zeng, Weidong
    Sun, Yu
    Han, Yuanfei
    Zhao, Yongqing
    Guo, Ping
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (04) : 1754 - 1762
  • [26] Microstructure, properties and biocompatibility of the nitrided Ti-6Al-4V alloy for medical application
    Czyrska-Filemonowicz, A.
    Buffat, P. A.
    Czarnowska, E.
    Wierzchon, T.
    ADVANCED MATERIALS AND TECHNOLOGIES, 2006, 513 : 15 - 24
  • [27] Effect of hydrogenation on microstructure and mechanical properties of Ti-6Al-4V titanium alloy
    Zhou, Li
    Liu, Huijie
    ADVANCED ENGINEERING MATERIALS III, PTS 1-3, 2013, 750-752 : 596 - 602
  • [28] Microstructure and Corrosion Properties of Ti-6Al-4V alloy by Ultrasonic Shot Peening
    Zhang, Conghui
    Song, Wei
    Li, Fengbo
    Zhao, Xu
    Wang, Yaomian
    Xiao, Guizhi
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2015, 10 (11): : 9167 - 9178
  • [29] Microstructure and mechanical properties of hot isostatically pressed Ti-6Al-4V alloy
    Kim, Youngmoo
    Kim, Eun-Pyo
    Song, Young-Beom
    Lee, Sung Ho
    Kwon, Young-Sam
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 603 : 207 - 212
  • [30] Microstructure and mechanical properties of laser rapid formed Ti-6Al-4V alloy
    Chen Jing
    Xue Lei
    Yang Haiou
    Tan Hua
    Huang Weidong
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 : 160 - 163
12345