Formulation and assessment of an enhanced finite element procedure for the analysis of delamination growth phenomena in composite structures

被引：49

作者：

Pietropaoli, Elisa ^{[1
]}

Riccio, Aniello ^{[1
]}

机构：

[1] CIRA Italian Aerosp Res Ctr, I-81043 Capua, Italy

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2011年 / 71卷 / 06期

关键词：

Layered structures; Delamination; Buckling; Damage mechanics; Finite element analysis; Damage tolerance; CRACK-CLOSURE TECHNIQUE; STRESS INTENSITY FACTORS; RELEASE RATE CALCULATION; FRONT;

D O I：

10.1016/j.compscitech.2011.01.026

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

An existing procedure based on the combined use of the Virtual Crack Closure Technique and of a fail release approach for the analysis of delamination growth phenomena in composite structures has been enhanced with a front-tracing algorithm and suitable expressions for the evaluation of the Strain Energy Release Rate when dealing with non-smoothed delamination fronts. The enhanced procedure has been implemented into a commercial finite element software by means of user subroutines and applied to the analysis of a composite stiffened panel with an embedded delamination under compressive load. The effectiveness and robustness of the enhanced procedure have been assessed by comparing literature experimental data and numerical results obtained by using different mesh densities in the damaged area (global/local approach). (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：836 / 846

页数：11

共 50 条

[31] A FINITE-ELEMENT ANALYSIS OF CONFIGURATIONAL STABILITY AND FINITE GROWTH OF BUCKLING DRIVEN DELAMINATION
NILSSON, KF
GIANNAKOPOULOS, AE
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1995, 43 (12) : 1983 - 2021
[32] Finite element modeling of composite plates with internal delamination
Alnefaie, K.
COMPOSITE STRUCTURES, 2009, 90 (01) : 21 - 27
[33] Finite element analysis of impact induced delamination in composite materials using a novel interface element
Loughborough Univ, Loughborough, United Kingdom
Compos Part A Appl Sci Manuf, 3 (301-313):
[34] The finite element analysis of impact induced delamination in composite materials using a novel interface element
Wisheart, M
Richardson, MOW
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1998, 29 (03) : 301 - 313
[35] Finite element analysis of delamination of a composite component with the cohesive zone model technique
Lampani, Luca
ENGINEERING COMPUTATIONS, 2011, 28 (1-2) : 30 - 46
[36] Finite element simulation of delamination process in composite materials
Sabau, Emilia
Vilau, Cristian
Bere, Paul
Popescu, Adrian
MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2019), 2019, 299
[37] Calibration of a finite element composite delamination model by experiments
Gaiotti, M.
Rizzo, C. M.
Branner, K.
Berring, P.
ANALYSIS AND DESIGN OF MARINE STRUCTURES, MARSTRUCT 2013, 2013, : 389 - 396
[38] Multiscale Finite Element Analysis of Delamination Growth in a Double Cantilever Beam Specimen Made of Woven Fabric Composite
Lessard, Larry
Yamanaka, Tadayoshi
Ghiasi, Hossein
Feret, Victor
Hubert, Pascal
DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2013, : 251 - 258
[39] Finite element simulation of delamination growth in composite materials using LS-DYNA
Elmarakbi, A. M.
Hu, N.
Fukunaga, H.
COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (14) : 2383 - 2391
[40] Finite Element Analysis of Composite Volleyball Upright Structures
Shan, Luyang
Shan, Yi
TRENDS IN CIVIL ENGINEERING, PTS 1-4, 2012, 446-449 : 247 - +

← 1 2 3 4 5 →