Residual Stresses in Overlapping Friction Taper Stud Welds

被引：5

作者：

Hattingh, D. G. ^{[1
]}

Steuwer, A. ^{[1
]}

James, M. N. ^{[1
]}

Wedderburn, I. N. ^{[1
]}

机构：

[1] NMMU, ZA-6031 Port Elizabeth, South Africa

来源：

MECHANICAL STRESS EVALUATION BY NEUTRONS AND SYNCHROTRON RADIATION | 2010年 / 652卷

关键词：

Friction taper stud weld; Overlapping welds; Residual stress; Neutron diffraction; Creep resistant steel;

D O I：

10.4028/www.scientific.net/MSF.652.111

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

This paper presents microstructural, hardness and residual strain information for solid-state welds in creep-resistant Cr-Mo steel, made using the new local damage repair technique offered by friction taper stud welding (FTSW). The technique is suitable for making single welds to repair, for example, localised creep damage but can also be extended to deal with planar defects through the use of overlapping welds. Neutron diffraction was used to measure residual strains at a number of positions along a series of 5 overlapping FTS welds.

引用

页码：111 / 115

页数：5

共 50 条

[41] Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds
Commin, Lorelei
Dumont, Myriam
Rotinat, Rene
Pierron, Fabrice
Masse, Jean-Eric
Barrallier, Laurent
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 551 : 288 - 292
[42] Residual stresses, microstructure and tensile properties in Ti-6Al-4V friction stir welds
Steuwer, A.
Hattingh, D. G.
James, M. N.
Singh, U.
Buslaps, T.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (07) : 525 - 533
[43] Modelling of residual stresses and property distributions in friction stir welds of aluminium alloy 6061-T6
Feng, Z.
Wang, X.-L.
David, S. A.
Sklad, P. S.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (04) : 348 - 356
[44] Analysis of Residual Stresses and Dislocation Density of AA6082 Butt Welds Produced by Friction Sir Welding
Aleksandra Laska
Marek Szkodo
Pasquale Cavaliere
Dorota Moszczyńska
Jarosław Mizera
Metallurgical and Materials Transactions A, 2023, 54 : 211 - 225
[45] Investigation of effect of deformation treatment on residual stresses in circumferential welds
Zubchenko, A.S.
Koloskov, M.M.
Amelyanchik, A.V.
Levitan, L.M.
Shirolapova, T.B.
Avtomaticheskaya Svarka, 2002, (01): : 3 - 10
[46] Investigation of the distribution of residual stresses in dissimilar thickness girth welds
Sidorov, Mikhail M.
1ST INTERNATIONAL CONFERENCE ON INTEGRITY AND LIFETIME IN EXTREME ENVIRONMENT (ILEE-2019), 2019, 20 : 180 - 184
[47] Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds
Peel, M
Steuwer, A
Preuss, M
Withers, PJ
ACTA MATERIALIA, 2003, 51 (16) : 4791 - 4801
[48] COMPUTER MODELING OF TRANSVERSE RESIDUAL-STRESSES IN REPAIR WELDS
LEGGATT, RH
WELDING JOURNAL, 1991, 70 (11) : S299 - S310
[49] POTENTIAL-ENERGY OF RESIDUAL-STRESSES IN BUTT WELDS
PROKHORENKO, VM
AUTOMATIC WELDING USSR, 1974, 27 (03): : 28 - 31
[50] Prediction of residual stresses in welds of similar and dissimilar steel weldments
Chin-Hyung Lee
Kyong-Ho Chang
Journal of Materials Science, 2007, 42 : 6607 - 6613

← 1 2 3 4 5 →