High-coupling-efficiency optical interconnection using a 90○-bent fiber array connector in optical printed circuit boards

被引：31
|
作者：
Cho, MH [1 ]
Hwang, SH [1 ]
Cho, HS [1 ]
Park, HH [1 ]
机构：
[1] Informat & Commun Univ, Opt Interconnect & Switching Lab, Taejon 305714, South Korea
来源：
IEEE PHOTONICS TECHNOLOGY LETTERS | 2005年 / 17卷 / 03期
关键词：
connector; fiber bending; optical interconnection; optical printed-circuit board (OPCB);
D O I：
10.1109/LPT.2004.840916
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A high-coupling-efficiency optical interconnection has been demonstrated using a 90degrees-bent fiber array connector to deflect beams between surface-emitting lasers or surface-receiving photodiodes and optical layers embedded in a board. A 90degrees-bent fiber array is mounted in a tetragonal body with a millimeter scale size to make it suitable for passive packaging in the board. The bending radius of silica fibers in the connector was controlled to have 1.5 mm resulting in bending loss of about 0.5 dB. An optical link of 2.5-Gb/s signals with a total interconnection loss of -1.3 dB was demonstrated using the connectors and a fiber-embedded board.
引用
收藏
页码：690 / 692
页数：3
相关论文
共 50 条
  • [31] RADIANT CURED POLYMER OPTICAL WAVE-GUIDES ON PRINTED-CIRCUIT BOARDS FOR PHOTONIC INTERCONNECTION USE
    HARTMAN, DH
    LALK, GR
    HOWSE, JW
    KRCHNAVEK, RR
    APPLIED OPTICS, 1989, 28 (01): : 40 - 47
  • [32] VCSEL Module With Polymer Optical Output Rods to Enable High Efficiency Coupling for Optical Interconnection
    Kanda, Masahiro
    Ogawa, Tomonori
    Mikami, Osamu
    IEEE PHOTONICS TECHNOLOGY LETTERS, 2009, 21 (9-12) : 685 - 687
  • [33] Fabrication of fiber-embedded boards using grooving technique for optical interconnection applications
    Cho, HS
    Kang, S
    Rho, BS
    Park, HH
    Shin, KU
    Ha, SW
    Rhee, BH
    Kim, DS
    Jung, ST
    Kim, T
    OPTICAL ENGINEERING, 2004, 43 (12) : 3083 - 3088
  • [34] Optical printed circuit boards with multimode polymer waveguides and pluggable connectors for high-speed optical interconnects
    Shi, Ying
    Liu, Xu
    Ma, Lin
    Immonen, Marika
    Zhu, Longxiu
    He, Zuyuan
    OPTICS EXPRESS, 2023, 31 (17) : 27776 - 27786
  • [35] Thermal and optical investigations of high power LEDs with metal embedded printed circuit boards
    Ding, Xinrui
    Tang, Yong
    Li, Zongtao
    Chen, Qiu
    Li, Yuji
    He, Yongtai
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2015, 66 : 32 - 39
  • [36] Optical detection of breaks and short circuits on the layouts of printed circuit boards using CNN
    Szolgay, P
    Tomordi, K
    1996 FOURTH IEEE INTERNATIONAL WORKSHOP ON CELLULAR NEURAL NETWORKS AND THEIR APPLICATIONS, PROCEEDINGS (CNNA-96), 1996, : 87 - 92
  • [37] Optical interconnection on PCB level using MT compatible connectors and fiber-embedded boards
    SHEN Guang
    OptoelectronicsLetters, 2006, (06) : 452 - 454
  • [38] Optical interconnection on PCB level using MT compatible connectors and fiber-embedded boards
    Guang Shen
    Ming-cui Cao
    Feng-guang Luo
    Ping Huang
    Qi-rui Huang
    Optoelectronics Letters, 2006, 2 (6) : 452 - 454
  • [39] Optical interconnection on PCB level using MT compatible connectors and fiber-embedded boards
    Shen Guang
    Cao Ming-cui
    Luo Feng-guang
    Huang Ping
    Huang Qi-rui
    OPTOELECTRONICS LETTERS, 2006, 2 (06) : 452 - 454
  • [40] Cost-effective On-board Optical Interconnection using Waveguide Sheet with Flexible Printed Circuit Optical Engine
    Shiraishi, Takashi
    Yagisawa, Takatoshi
    Ikeuchi, Tadashi
    Ide, Satoshi
    Tanaka, Kazuhiro
    2011 OPTICAL FIBER COMMUNICATION CONFERENCE AND EXPOSITION (OFC/NFOEC) AND THE NATIONAL FIBER OPTIC ENGINEERS CONFERENCE, 2011,
12345