Effect of Alumina Addition on the Microstructure and Mechanical Properties of Metal Inert Gas Welded Low Carbon Steel

被引：1

作者：

Sathish, S. ^{[1
]}

Geetha, M. ^{[2
]}

机构：

[1] Aalim Muhammed Salegh Coll Engn, Avadi IAF, Dept Mech Engn, Madras 600055, Tamil Nadu, India

[2] VIT Univ, Sch Mech & Bldg Sci, Vellore 632014, Tamil Nadu, India

来源：

TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY | 2017年 / 76卷 / 03期

关键词：

Alumina; Laser remelting; Microstructure; Hardness; Fractography; PLASMA-SPRAYED ALUMINA; FIBER LASER; STAINLESS-STEEL; COATINGS; WEAR; BEHAVIOR; JOINTS; RESISTANCE; OXIDATION; ALLOY;

D O I：

10.1080/0371750X.2017.1296785

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this study, influence of alumina addition on weld appearance, microstructure and mechanical properties of metal inert gas (MIG) welded low carbon mild steel were emphatically investigated. Experimental results show that all the joints were smooth with free of cracks. Microstructures of MIG and laser remelted joints show the presence of columnar and equiaxed dendrites. Furthermore, superior microhardness of MIG welded joint over alumina added and laser remelted joints is ascribed to the presence of columnar dendrites. Fractography of the tensile tested alumina added joint exhibited a mixed mode of ductile and brittle characteristics and this is attributed to the presence of acicular ferrites and bainite in the microstructure.

引用

页码：176 / 182

页数：7

共 50 条

[31] Pulsed gas metal arc additive manufacturing of low-carbon steel: Microstructure observations and mechanical properties
Mohammadi, Javad
Dashtgerd, Iman
Riahi, Reza
Mostafaei, Amir
MATERIALS TODAY COMMUNICATIONS, 2024, 38
[32] Effect of shielding gas combination on microstructure and mechanical properties of MIG welded stainless steel 316
Acar, Ismail
Gulenc, Behcet
MATERIALS TESTING, 2021, 63 (01) : 97 - 101
[33] Influence of Filler Metals on Microstructure and Mechanical Properties of Gas Metal Arc Welded High Strength Steel
Kovacs, Judit
Lukacs, Janos
VEHICLE AND AUTOMOTIVE ENGINEERING 4, VAE2022, 2023, : 995 - 1005
[34] Characterization of the microstructure and mechanical properties of activated tungsten inert gas welded and hot-wire tungsten inert gas welded super austenitic stainless steel AISI 904L
Sunny, Kora T.
Korra, Nanda Naik
Muthukumaran, Vasudevan
Arivazhagan, Baksha
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023, 237 (02) : 469 - 481
[35] Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Plain Carbon Steel
Ghosh, Mainak
Hussain, Murtuja
Gupta, Rajneesh Kumar
ISIJ INTERNATIONAL, 2012, 52 (03) : 477 - 482
[36] Effect of High Temperatures on the Mechanical Properties of the Weld Metal in the Welded Joint of Low-Carbon Low-Alloy Steel
Nikulin, S. A.
Rogachev, S. O.
Belov, V. A.
Turilina, V. Yu
Shplis, N., V
RUSSIAN METALLURGY, 2021, 2021 (10): : 1314 - 1319
[37] Effect of High Temperatures on the Mechanical Properties of the Weld Metal in the Welded Joint of Low-Carbon Low-Alloy Steel
S. A. Nikulin
S. O. Rogachev
V. A. Belov
V. Yu. Turilina
N. V. Shplis
Russian Metallurgy (Metally), 2021, 2021 : 1314 - 1319
[38] Effects of heat input on mechanical properties of metal inert gas welded 1.6 mm thick galvanized steel sheet
Rafiqul, M. I.
Ishak, M.
Rahman, M. M.
1ST INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH 2011 (ICMER2011), 2012, 36
[39] Microstructure and Mechanical Properties of a Low Carbon Bainitic Steel
Lan, Hui Fang
Du, Lin Xiu
Liu, Xiang Hua
STEEL RESEARCH INTERNATIONAL, 2013, 84 (04) : 352 - 361
[40] Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal
Shen, Jiajia
Goncalves, Rita
Choi, Yeon Taek
Lopes, J. G.
Yang, Jin
Schell, N.
Kim, Hyoung Seop
Oliveira, J. P.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 857

← 1 2 3 4 5 →