Optimization of drilling parameters on carbon fiber reinforced polymer composites using fuzzy logic

被引：19
|
作者：
Upputuri, Hari Babu [1 ]
Nimmagadda, Vijaya Sai [2 ]
Duraisamy, Elayaraja [1 ]
机构：
[1] QIS Coll Engn & Technol, Dept Mech Engn, Ongole 523272, AP, India
[2] VR Siddhartha Engn Coll, Vijayawada 520007, AP, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 23卷
关键词：
Carbon fibre; Composites; Drilling; L-9 orthogonal array; Fuzzy logic; ANOVA; SURFACE-ROUGHNESS;
D O I：
10.1016/j.matpr.2019.05.400
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The research and market attention towards advanced carbon fiber based composites are very significant in recent days because of their very good mechanical properties and are widely used in applications include automotive, aerospace, and construction industries, etc. The drilling experiments are conducted using Taguchi L-9 orthogonal array in the design of experiments. In the present work fuzzy logic is used in determining the performance characteristics like thrust force, torque and de-lamination factor in drilling of CFRP composite. Good agreement is observed between fuzzy results and the experimental values. The ANOVA analysis is carried out to find out parameter significant during drilling CFRP composite. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：528 / 535
页数：8
相关论文
共 50 条
  • [31] Optimization of Cutting Parameters in Helical Milling of Carbon Fiber Reinforced Polymer
    Wang H.
    Qin X.
    Wu D.
    Song A.
    Transactions of Tianjin University, 2018, 24 (1) : 91 - 100
  • [32] Optimization of Cutting Parameters in Helical Milling of Carbon Fiber Reinforced Polymer
    Haiyan Wang
    Xuda Qin
    Dongxu Wu
    Aijuan Song
    Transactions of Tianjin University, 2018, (01) : 91 - 100
  • [33] Optimization of Cutting Parameters in Helical Milling of Carbon Fiber Reinforced Polymer
    Haiyan Wang
    Xuda Qin
    Dongxu Wu
    Aijuan Song
    Transactions of Tianjin University, 2018, 24 (01) : 91 - 100
  • [34] Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experiments
    Babu, G. Dilli
    Babu, K. Sivaji
    Gowd, B. Uma Maheswar
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2013, 20 (05) : 385 - 390
  • [35] OPTIMIZATION OF PROCESS PARAMETERS DURING DRILLING OF GLASS-FIBER POLYESTER REINFORCED COMPOSITES USING DOE AND ANOVA
    Mohan, N. S.
    Kulkarni, S. M.
    Ramachandra, A.
    IIUM ENGINEERING JOURNAL, 2006, 7 (01): : 13 - 24
  • [36] Investigation of drilling parameters on hybrid polymer composites using grey relational analysis, regression, fuzzy logic, and ANN models
    Anand, G.
    Alagumurthi, N.
    Elansezhian, R.
    Palanikumar, K.
    Venkateshwaran, N.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (04)
  • [37] Investigation of drilling parameters on hybrid polymer composites using grey relational analysis, regression, fuzzy logic, and ANN models
    G. Anand
    N. Alagumurthi
    R. Elansezhian
    K. Palanikumar
    N. Venkateshwaran
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [38] Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics
    Krishnamoorthy, A.
    Boopathy, S. Rajendra
    Palanikumar, K.
    Davim, J. Paulo
    MEASUREMENT, 2012, 45 (05) : 1286 - 1296
  • [39] Optimization of input parameters during drilling of glass fiber reinforced polymer composite using grey relational analysis
    Pathak, Shashi Ranjan
    Malik, Anup
    Mali, Harlal Singh
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (06): : 4075 - 4091
  • [40] Full Paper - EFFECT OF DRILLING PARAMETERS ON SURFACE QUALITY OF NATURAL FIBER REINFORCED POLYMER COMPOSITES
    Selvakumar, K.
    Omkumar, M.
    Babu, A. Suresh
    ICCM 21: 21ST INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM-21), 2017,
12345