MECHANICAL AND DRY SLIDING WEAR BEHAVIOR OF ULTRAFINE-GRAINED AISI 1024 STEEL PROCESSED USING MULTI AXIAL FORGING

被引：0
|
作者：
Padap, A. K. [1 ]
Chaudhari, G. P. [1 ]
Nath, S. K. [1 ]
机构：
[1] Indian Inst Technol Roorkee, Dept Met & Mat Engn, Uttarakhand 247667, India
来源：
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY | 2010年
关键词：
Grain refinement; Multi-axial forging; Steel; dry sliding wear; tribology; TRIBOLOGICAL PROPERTIES;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AISI 1024 steel was severely deformed by using warm (500 C) multiaxial forging (MAF) technique using up to 9 MAF passes in order obtain ultrafine grained (UFG) microstructure. Grain refinement is confirmed using TEM. After warm MAF, the hardness and strength properties improved significantly, although total elongation values decreased. The tribological properties of UFG low carbon steel produced by MAF have been investigated. Dry sliding was carried out using constant sliding speed. The wear test results showed that the strengthening of AISI 1024 steel by warm MAF processing did not lead to the improvement of wear resistance. The results have been explained on the basis of its microstructural features, lower work hardening rate, and low pull-off work.
引用
收藏
页码：757 / 764
页数：8
相关论文
共 50 条
  • [41] Tensile behavior and deformation mechanisms of ultrafine-grained aluminum processed using equal-channel angular pressing
    Ivanov, K.V. (ikv@ispms.tsc.ru), 1600, Elsevier Ltd (606):
  • [42] Tensile behavior and deformation mechanisms of ultrafine-grained aluminum processed using equal-channel angular pressing
    Ivanov, K. V.
    Naydenkin, E. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 606 : 313 - 321
  • [43] Microstructure and mechanical properties of ultrafine-grained titanium processed by multi-pass ECAP at room temperature using core-sheath method
    Derakhshandeh, Alireza
    Shahmir, Hamed
    Nili-Ahmadabadi, Mahmoud
    JOURNAL OF MATERIALS RESEARCH, 2018, 33 (22) : 3809 - 3817
  • [44] Characterization and Modeling of Wear Behavior of AISI D3 Tool Steel under Dry Sliding Conditions
    Cavdar, Faruk
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (16) : 8354 - 8371
  • [45] Examination on dry sliding wear behavior of AISI 304 stainless steel treated with salt bath nitriding process
    Gandhi, M. Mamatha
    Bain, Animesh
    Prasanna, G. Lakshmi
    Vamshi, M.
    Saranya, J.
    Dhruthi, N.
    Sateesh, N.
    Subbiah, Ram
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1412 - 1417
  • [46] Influence of Pressing Temperature on Microstructure Evolution and Mechanical Behavior of Ultrafine-Grained Cu Processed by Equal-Channel Angular Pressing
    Wen, Haiming
    Zhao, Yonghao
    Topping, Troy D.
    Ashford, Dustin
    Figueiredo, Roberto B.
    Xu, Cheng
    Langdon, Terence G.
    Lavernia, Enrique J.
    ADVANCED ENGINEERING MATERIALS, 2012, 14 (03) : 185 - 194
  • [47] Effect of vanadium carbide on dry sliding wear behavior of powder metallurgy AISI M2 high speed steel processed by concentrated solar energy
    Garcia, C.
    Romero, A.
    Herranz, G.
    Blanco, Y.
    Martin, F.
    MATERIALS CHARACTERIZATION, 2016, 121 : 175 - 186
  • [48] Mechanical and wear properties of ultrafine-grained pure Ti produced by multi-pass equal-channel angular extrusion
    Purcek, G.
    Saray, O.
    Kul, O.
    Karaman, I.
    Yapici, G. G.
    Haouaoui, M.
    Maier, H. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2): : 97 - 104
  • [49] NiCrBSi/WC Composite Claddings Processed on AISI 316L Steel Alloy by the Direct Laser Deposition Process: Studies on Dry Sliding Wear Behavior and Wear Mechanism Maps
    Birada, Lakshmi Manasa
    Vyshnavi, Pullela
    Rao, Thella Babu
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (09):
  • [50] Modeling of Microstructure Effects on the Mechanical Behavior of Ultrafine-Grained Nickels Processed by Severe Plastic Deformation by Crystal Plasticity Finite Element Model
    The-Duong Nguyen
    Van-Tung Phan
    Quang-Hien Bui
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (02):
12345