Microstructure and electrode discharge machining of TIN/Si3N4 composites

被引：0
|
作者：
Liu, CC [1 ]
Huang, JL [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 701, Taiwan
来源：
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 | 2005年 / 475-479卷
关键词：
Tin/Si3N4; composite; electrical discharge machining;
D O I：
10.4028/www.scientific.net/MSF.475-479.1337
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Conductive TiN/Si3N4 ceramic composites were processed by electrical discharge machining (EDM) and their microstructure and conductivity investigated. A low electrical resistivity of 1.25 X 10(-3) ohm.cm was obtained in 40vol%TiN/Si3N4 composite. The whole process of tool electrode wear is evaluated by sinker-EDM. The machined surfaces of TiN/Si3N4 ceramic composites were examined by scanning electron microscopy (SEM) and profilometry to determine the surface finish. Micropores of 700 mu m in depth and 70 mu m in in diameter were successfully machined in TiN/Si3N4 composites by the micro-EDM method.
引用
收藏
页码：1337 / 1340
页数：4
相关论文
共 50 条
  • [31] The Si3N4 and Si3N4/TiC layered composites by slip casting
    Yeh, CH
    Hon, MH
    CERAMICS INTERNATIONAL, 1997, 23 (04) : 361 - 366
  • [32] Investigations on the microstructure and hardening mechanism of TiN/Si3N4 nanocomposite coatings
    Kong, Ming
    Zhao, Wenji
    Wei, Lun
    Li, Geyang
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2007, 40 (09) : 2858 - 2863
  • [33] The Influence of Sintering Temperature on Properties and Microstructure of TiN/Si3N4 Composite
    Wu Laner
    Jiang Yong
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 878 - 882
  • [34] Laser machining of Si3N4 ceramics
    Burck, P
    Wiegel, K
    OPTICAL AND QUANTUM ELECTRONICS, 1995, 27 (12) : 1349 - 1358
  • [35] Microstructure and mechanical properties of Si3N4f/Si3N4 composites with different coatings
    Zhou, Jie
    Ye, Fang
    Cheng, Laifei
    Li, Mingxing
    Yue, Wei
    Wang, Yusheng
    CERAMICS INTERNATIONAL, 2019, 45 (10) : 13308 - 13314
  • [36] The effect of microstructure on the tribological behaviour of monolithic Si3N4 and Si3N4-SiC composites
    Gomes, JR
    Osendi, MI
    Miranzo, P
    Oliveira, FJ
    Silva, RF
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2000, 39 (03): : 263 - 268
  • [37] Research of large-area electrical discharge machining for insulating Si3N4 ceramics with the assisting electrode method
    Hanaoka, D.
    Fukuzawa, Y.
    Yamashita, K.
    Advances in Materials and Processing Technologies XVI, 2014, 939 : 76 - 83
  • [38] Process investigation of precision micro-machining of Si3N4-TiN ceramic composites by electrical discharge machining (EDM)
    Liu, K.
    Ferraris, E.
    Peirs, J.
    Lauwers, B.
    Reynaerts, D.
    PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, : 221 - 226
  • [39] Linking microstructure evolution and impedance behaviors in spark plasma sintered Si3N4/TiC and Si3N4/TiN ceramic nanocomposites
    Liu, Bernard Haochih
    Su, Po-Jui
    Lee, Ching-Huan
    Huang, Jow-Lay
    CERAMICS INTERNATIONAL, 2013, 39 (04) : 4205 - 4212
  • [40] In situ processing of TiN/Si3N4 composites by Ti-Si3N4 solid state reaction
    Huang, QL
    Juan, C
    Wei, P
    Jian, C
    Jie, L
    MATERIALS LETTERS, 1997, 31 (3-6) : 221 - 225
12345