Surface characteristics and corrosion behavior of Ti-4Al-2V alloy implanted with Al and Nb

被引：3
|
作者：
Liu, Y. Z. [1 ,2 ]
Zu, X. T. [1 ]
Qiu, S. Y. [2 ]
Huang, X. Q. [2 ]
机构：
[1] Univ Elect Sci & Technol China, Dept Appl Phys, Chengdu 610054, Peoples R China
[2] Natl Key Lab Nucl Fuel & Mat, Chengdu 610041, Peoples R China
来源：
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3 | 2007年 / 561-565卷
关键词：
corrosion resistance; ion implantation; phase formation; Ti-Al-V;
D O I：
10.4028/www.scientific.net/MSF.561-565.2443
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A Ti-Al-V alloy was implanted with Al and Nb to flounces ranging from 1 x 10(17) to 1 x 10(18) ions cm(-2). Glancing Angle XRD measurement revealed alpha-Ti on Al-implanted samples and (alpha+beta)-Ti on Nb-implanted samples. The (alpha+beta)-phase samples exhibit better corrosion resistance. In the aerated solution with pH = 10, all the implanted surfaces are passive. Enhanced reoxidation was confirmed on implanted surfaces by Auger electron spectroscopy and X-ray photoelectron spectroscopy analysis. The corrosion in the solution with pH = 10 was governed predominantly by a TiO2 surface film.
引用
收藏
页码：2443 / +
页数：2
相关论文
共 50 条
  • [21] Study of δ-hydrides in Ti-2Al-2.5Zr and Ti-4Al-2V alloys
    Yu, H
    Gu, JL
    Liu, Q
    Liu, YZ
    RARE METALS, 2006, 25 (01) : 16 - 20
  • [22] Superplastic deformation behavior of Ti-4Al-2V alloy governed by its structure and precipitation phase evolution
    Ratochka, Ilya
    Lykova, Olga
    Mishin, Ivan
    Naydenkin, Evgeny
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 731 : 577 - 582
  • [23] Study of δ-hydrides in Ti-2Al-2.5Zr and Ti-4Al-2V alloys
    YU Huang
    RareMetals, 2006, (01) : 16 - 20
  • [24] Permeation behavior of deuterium implanted into Ti-6Al-4V alloy
    Japan Atomic Energy Research Inst, Ibaraki-ken, Japan
    J Nucl Mater, (60-63):
  • [25] Effect of surface nanocrystallization on the corrosion behavior of Ti-6Al-4V titanium alloy
    Jelliti, S.
    Richard, C.
    Retraint, D.
    Roland, T.
    Chemkhi, M.
    Demangel, C.
    SURFACE & COATINGS TECHNOLOGY, 2013, 224 : 82 - 87
  • [26] Corrosion Behavior of Various Surface Treatments Ti-6Al-4V Alloy - A Review
    Yusuf, Yusliza
    Nooririnah, O.
    Azhari, Muhamad Azwar
    Johari, Md Ashadi Bin Md
    MATERIALS ENGINEERING AND TECHNOLOGY, 2014, 849 : 58 - 61
  • [27] The Effect of High Temperature Oxidation on the Fatigue Fracture Mechanism of Ti-4Al-2V Alloy
    Omidbakhsh, Faraz
    Ebrahimi, Ali Reza
    Zarei, Farhad
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL III, 2012, : 1857 - 1859
  • [28] Low-temperature plasma nitriding at 500°C on surface-nanocrystalline Ti-4Al-2V alloy
    Zhang, Chengwei
    Wen, Kai
    Gao, Yan
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 306
  • [29] Fatigue behavior of titanium Ti-4Al-2V rods under high cycle loading
    Xiong, Ru
    Wang, Li
    Liu, Gui-Liang
    Zhu, Chang-Gui
    Li, Chuan-Qian
    Hedongli Gongcheng/Nuclear Power Engineering, 2010, 31 (04): : 114 - 117
  • [30] Influence of sintering on the corrosion behavior of a Ti-6Al-4V alloy
    Bautista, A
    Moral, C
    Blanco, G
    Velasco, F
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2005, 56 (02): : 98 - 103
12345