Synthesis and characterization of macroporous chitosan/calcium phosphate composite scaffolds for tissue engineering

Chitosan scaffolds reinforced by beta -tricalcium phosphate (beta -TCP) and calcium phosphate invert glass were fabricated with a low-cost, bioclean freeze-drying technique via thermally induced phase separation. The microstructure, mechanical performance, biodegradation, and bioactivity of the scaffolds were studied. The composite scaffolds were macroporous, and the pore structures of the scaffolds with beta -TCP and the glass appeared very different. Both the compressive modulus and yield strength of the scaffolds were greatly improved, and reinforced microstructures were achieved. The bioactivity tests showed a continuous decrease in both Ca and P concentrations of a simulated body fluid (SBF) after the scaffolds with beta -TCP were immersed in the SBF for more than 20 h, which suggests that an apatite layer might be formed on the scaffolds. However, the same was not observed for the pure chitosan scaffolds or the scaffolds incorporated with the glass. This was further confirmed by micrographs from scanning electron microscopy. This study suggests that the desirable pore structure, biodegradation rate, and bioactivity of the composite scaffolds might be achieved through controlling the ratio of chitosan and calcium phosphates or beta -TCP and the glass. (C) 2001 John Wiley & Sons, Inc.